Sunbeam KY-25 user manual Recommended Grounding Method, Lcdi Plug Technology US only

Page 6

SECTION 1 IMPORTANT SAFETY INSTRUCTIONS

1.6 RECOMMENDED GROUNDING METHOD

For your personal safety, this portable air conditioner must be grounded. The portable air conditioner is equipped with a power supply cord with a 3-prong grounding plug. To minimize possible electrical shock hazard, the cord must be plugged into a mating 3-prong grounding type outlet, grounded in accordance with all local codes and ordinances. If a mating 3-prong type outlet is not available, it is the consumer's responsibility to have a properly grounded, 3-prong outlet installed by a licensed installer.

It is the customer's responsibility:

•To contact a qualified electrical installer.

•To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70 – latest edition, and all local codes and ordinances.

Copies of the standards listed may be obtained from:

National Fire Protection Association

Batterymatch Park

Quincy, Massachusetts 02269.

Or your state board of electricity.

1.7 LCDI PLUG TECHNOLOGY (US ONLY)

A Leakage-Current Detect and Interrupt (LCDI) is a device that senses leakage current flowing between or fom the power conductors in an appliance cord and interrupts the circuit as a predetermined level of leakage current. Since an LCDI specifically can detect a current leakage flowing to ground, it provides ground fault protection from arcing and other problems, which arise due to leakage between conductors.

LCDIs are covered under the UL 1699 standard for ARC Fault Current Interrupts, which was first published in June of 2002. LCDI devices have been mandated by the National Electric Code and Underwritten Laboratories for the cordsets on room air conditioners beginning in August 2004. Other classes of appliances will require LCDI protection in the near future.

TESTING

1.Press test button, unit should trip.

2.Press reset button for use.

NOTE: DO NOT USE IF ABOVE TEST FAILS.

In the event this device trips, the cause of the malfunction is to be corrected before use of the device.

CAUTION

The conductors inside this cord are surrounded by shields, which monitor leakage current. THESE SHIELDS ARE NOT GROUNDED. Periodically examine the cord for any damage. DO NOT USE this product in the event the shields become exposed.

WARNING

This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm.

Wash hands after handling.

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Guide D’UTILISATION Table of Contents Your safety and the safety of others are very important Important Safety InstructionsPortable AIR Conditioner Safety Save These Instructions for Future ReferencePlease help us to help you Special Recommendations Electrical RequirementsElectrical Shock Hazard Recommended Grounding Method Lcdi Plug Technology US onlyTechnical Specifications Unpacking Your Product PartsOperating Limits During Cooling Section Accessories Section Getting StartedTools Needed Power Supply Cord and Receptacle Knowing Your Portable AIR ConditionerSection Installation Instructions Portable AIR Conditioner InstallationInstalling the Ducts in a WINDOW/SLIDING Door Installing the Ducts in the Wall MANUFACTURER’S RecommendationOn/Off Button Use to Start or Stop the unit HOW to SET LCD Display PanelOperating Remote Control Model KY-25Y only Cooling OperationSOFT-DRY Operation TIMER-ON Program Setting FAN-ONLY OperationAuto Operation Water Full Indication TIMER-OFF Program SettingWater Full Indication and Draining DrainingWater Full Indication and Draining CONT’D External Plastic Parts MaintenanceCleaning or Replacing the AIR Filter Storage AT the END of the Cooling SeasonPortable AIR Conditioner does not Work AT ALL Section TroubleshootingSet the cooling temperature at a proper level LOW Cooling EfficiencyLOW Cooling CONT’D Noise and VibrationUnit Turns on and OFF Frequently

KY-25, Y specifications

The Sunbeam Y, KY-25 is a remarkable innovation in the realm of aerosol dispensers, specifically designed for efficiency and user convenience in various applications such as household cleaning, personal care, and industrial use. Combining cutting-edge technology with robust features, the KY-25 represents a significant advancement over traditional aerosol spray technologies.

One of the standout features of the Sunbeam Y, KY-25 is its ergonomic design. The dispenser is crafted to fit comfortably in the user's hand, reducing fatigue during prolonged use. The nozzle is designed for precision, allowing users to apply products evenly and accurately. This results in less waste and enhanced effectiveness in delivering sprays or liquid solutions.

The KY-25 incorporates a unique pressure regulation system that ensures consistent output regardless of the angle or orientation during use. This technology prevents drips and sputtering, providing a smooth and uninterrupted spray. As a result, users can achieve optimal coverage with minimal effort, making it an ideal choice for both commercial and domestic applications.

Another significant characteristic of the Sunbeam Y, KY-25 is its versatility. The device is compatible with various formulations, accommodating a wide range of liquids, from cleaning agents to personal care products. Additionally, the KY-25 is designed for ease of refilling, supporting sustainability by reducing single-use aerosol waste. The user-friendly refill process enables quick and hassle-free transitions between different products.

The KY-25 also boasts advanced safety features. Its design incorporates a child-proof locking mechanism to prevent accidental discharges, making it safer for households with young children. Furthermore, the materials used in its construction are resistant to corrosion and degradation, ensuring longevity and reliability in various environments.

In summary, the Sunbeam Y, KY-25 is a pioneering aerosol dispenser that blends ergonomic design, consistent performance, and versatility. With its advanced pressure regulation system, compatibility with multiple formulations, and enhanced safety features, the KY-25 stands out as a leader in its category. Whether for household chores or industrial tasks, it empowers users with a practical solution for efficient aerosol application. This combination of technology and user-centric design makes the Sunbeam Y, KY-25 a must-have for anyone looking to optimize their aerosol dispensing needs.
Top Page Image Contents