Maintenance, Cleaning or Replacing the AIR Filter

SECTION 6 CARING FOR YOUR PORTABLE AIR CONDITIONER

6.1 MAINTENANCE

WARNING

•Make sure the power supply is switched off and the plug is pulled out of the power outlet before performing any maintenance activities.

•Do not immerse the unit in water or other liquids.

•Do not pour liquids into the unit.

•Take special precaution to avoid the sharp cutting edges of some parts.

•Do not use any kind of chemical solvents to clean the unit, as they may deform the unit cabinet.

6.2CLEANING OR REPLACING THE AIR FILTER

If the air filter is blocked with a lot of dust, the volume of airflow will be reduced and the cooling effect will be lower. It is recommended to clean the filter once every two weeks or as needed.

A)Pull out the filter from the filter compartment in front of the unit.

B)Wash the air filter by immersing it gently into warm (about 104°F/40°C) water with a gentle detergent. Rinse the filter and dry it thoroughly in a shaded place.

C)Place the filter back into the filter compartment after it is thoroughly dried.

D)If the filter is torn or unusable, order a new filter by calling the Sunbeam Customer Service department at 1-877-383-6399 (8:30am-5:30pm E.S.T.).

6.3EXTERNAL PLASTIC PARTS

A)Keep the unit from being exposed directly to the sun.

B)Clean the surface with a damp cloth.

C)For the Stainless Steel finished models, a good quality stainless steel cleaner should be used.

6.4STORAGE AT THE END OF THE COOLING SEASON

A)On a warm day, turn the unit on in the FAN-ONLY Mode for a couple of hours so that the inside can dry out completely.

B)Turn off the unit and unplug the unit.

C)Empty the residual condensated water by unplugging the LOWER WATER DRAINAGE CAP at the back towards the bottom of the unit. After connecting the 12’/3.65m white Drain Hose, ensure that the other end is in a bucket or receptacle for gathering the water.

D)Discharge the Hot air duct and shorten it and pack it in the box.

E)Clean the filter and dry it completely before fitting back in place.

F)Cover the appliance to protect it from dust. It is recommended that the unit be put back into its original box and package.

G)The unit should be stored in a cool dry place. Do not stack heavy objects on the top of the unit.

Lower drain port

Figure 17

KY-25, Y specifications

The Sunbeam Y, KY-25 is a remarkable innovation in the realm of aerosol dispensers, specifically designed for efficiency and user convenience in various applications such as household cleaning, personal care, and industrial use. Combining cutting-edge technology with robust features, the KY-25 represents a significant advancement over traditional aerosol spray technologies.

One of the standout features of the Sunbeam Y, KY-25 is its ergonomic design. The dispenser is crafted to fit comfortably in the user's hand, reducing fatigue during prolonged use. The nozzle is designed for precision, allowing users to apply products evenly and accurately. This results in less waste and enhanced effectiveness in delivering sprays or liquid solutions.

The KY-25 incorporates a unique pressure regulation system that ensures consistent output regardless of the angle or orientation during use. This technology prevents drips and sputtering, providing a smooth and uninterrupted spray. As a result, users can achieve optimal coverage with minimal effort, making it an ideal choice for both commercial and domestic applications.

Another significant characteristic of the Sunbeam Y, KY-25 is its versatility. The device is compatible with various formulations, accommodating a wide range of liquids, from cleaning agents to personal care products. Additionally, the KY-25 is designed for ease of refilling, supporting sustainability by reducing single-use aerosol waste. The user-friendly refill process enables quick and hassle-free transitions between different products.

The KY-25 also boasts advanced safety features. Its design incorporates a child-proof locking mechanism to prevent accidental discharges, making it safer for households with young children. Furthermore, the materials used in its construction are resistant to corrosion and degradation, ensuring longevity and reliability in various environments.

In summary, the Sunbeam Y, KY-25 is a pioneering aerosol dispenser that blends ergonomic design, consistent performance, and versatility. With its advanced pressure regulation system, compatibility with multiple formulations, and enhanced safety features, the KY-25 stands out as a leader in its category. Whether for household chores or industrial tasks, it empowers users with a practical solution for efficient aerosol application. This combination of technology and user-centric design makes the Sunbeam Y, KY-25 a must-have for anyone looking to optimize their aerosol dispensing needs.