Decorative Bay Window
Available for the UVS36 only.
When fitting the Bay Window Kit, the original front frame/glass assembly MUST remain in place. The Bay Window Kit is fit- ted over the existing front glass.
Installation
1.Remove the existing louvre assembly bottom com- plete with the hinges.
2.Remove the louvre assembly top.
3.Assembly the Bay Window Kit according to the in- structions supplied with the kit.
4.Place the 2 pieces of ceramic refractory along the base of the bay window. (Fig. 21)
5.Hang the bay window assembly over the existing window frame assembly.
6.Reinstall the louvre assembly top.
7.Do not remove the existing window frame assembly.
UVS33/36
| Louvre Assem- | |
| bly Top | |
| Bay | |
| Window | |
| Frame | |
Ceramic | Ceramic | |
Refractory | Refractory | |
| Spacers | |
| Louvre | |
Bottom | Assembly | |
Bottom | ||
Brass | ||
| ||
Trim |
| |
Screws | FP1195 |
Fig. 24 Bay window.
20002211 | 21 |