Window Kit Installation

Using Foam Strips:

Two foam strips are provided with the unit, each measuring 7" x 24".

If your window’s height or width is shorter than 24", please measure and cut the foam strip (with the pre-cut hole) to size.

If your window’s height or width is longer than 24" but shorter than 48", please attach the two strips together by using the yellow double-sided tapes provided and cut to size.

If your window is longer than 48", additional foam strips can be purchased directly from Amcor.

Installation

This unit is a portable air conditioner. It can be moved from room to room so that the cooling can follow you anywhere. Fitting the exhaust hose is easy, through a window or wall.

Please refer to either of the following ways:

Installation

Mounting the exhaust pipe

•The supplied exhaust hose can be extended from 1 foot to 5 feet

for mounting. It is recommended that

you use the shortest possible length of hose.

•Take care to prevent any kink or bend in the middle of the exhaust hose, as this will trap hot exhaust air, which will radiate back into the room.

1.Push out the pre-cut circle from one of the foam strips.

2.Insert the Round Connector (part #14) through the pre-cut hole. Note: the “lip” of the round Connector will be placed facing out.

3.Extend one end of the exhaust pipe (part #11) and screw into the Round Connector by turning clockwise.

4.Place and insert the foam strip into your window frame and close window to hold foams in place.

5.Extend other end of exhaust pipe and screw in Adaptor (part #10) by turning clockwise.

6.Push Adaptor to fit firmly over the opening on the back of the unit.

WARNING!

The length of the exhaust pipe is specially designed according to the specification of this product.

Do not replace or extend it with your own hose as this could cause the unit to malfunction.

Cleaning the Filter

Wall Connection

1.Make a hole (5.1" in diameter) in the wall.

2.Insert the Round Connector (part #14) into the hole and hold in place by using 4 small screws (not supplied).

3.Extend one end of the exhaust pipe (part #11) and screw into the Round Connector by turning clockwise.

4.Extend other end of exhaust pipe and screw in Adaptor (part #10) by turning clockwise.

5.Push Adaptor to fit firmly over the opening on the back of the unit.

**When not in use, cover the Round Connector and hole with Cap (part #15).

Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt from the filters and then rinse them thoroughly under running water (no hotter than 104ºF)

Dry thoroughly before replacing.

Notice! Never operate the unit without the filters.

ALD-1 2, ALD-12 specifications

Amcor ALD-1 and ALD-12 are state-of-the-art solutions in the field of packaging technology, specifically designed for the food and beverage industry. Renowned for their innovative approach to flexible packaging, these products have revolutionized how manufacturers approach sustainability and efficiency in packaging design.

The Amcor ALD-1 is known for its highly versatile properties, making it suitable for a wide range of applications, including pouches, films, and bags. This product is built with advanced materials that offer excellent barrier performance, ensuring that the contents remain fresh for extended periods. One of the standout features of the ALD-1 is its ability to effectively block moisture, oxygen, and light, thereby enhancing the shelf life of various products, from snacks to liquids.

On the other hand, the Amcor ALD-12 is an evolution in the ALD series, offering even greater functionality and sustainability. This product is designed with a focus on eco-friendliness, featuring materials that are not only recyclable but also produced utilizing energy-efficient processes. The ALD-12 boasts improved seal integrity, which is critical for maintaining product freshness and consumer safety. Its user-friendly design allows for easy handling during manufacturing and distribution, making it a favorite among manufacturers.

Both the ALD-1 and ALD-12 are produced using advanced co-extrusion technology, which enables the melding of different materials into a single, multi-layer structure. This process enhances the overall performance of the packaging while reducing the need for additional layers that can increase waste. Additionally, these products employ proprietary polymer blends that provide superior mechanical strength and thermal stability, making them suitable for various packaging machinery.

Amcor places a strong emphasis on sustainability and market adaptability. The ALD-1 and ALD-12 are readily customizable, allowing brands to create packaging that reflects their identity while meeting market demand. The ability to print high-quality graphics directly onto the packaging surface presents an opportunity for increased brand visibility and consumer engagement.

In conclusion, the Amcor ALD-1 and ALD-12 represent cutting-edge advancements in flexible packaging. Their formidable characteristics, focused on performance, sustainability, and versatility, make them ideal solutions for modern packaging needs. As the industry continues to evolve, Amcor remains a front-runner, facilitating innovative approaches to packaging that align with environmental goals and consumer expectations.