Operation Electronic Control Models, Parts

Operation - Electronic Control Models

Control Panel	Cool	Set Temp.	Low Fan	Timer
Fan Only		Room	High	Not available
Fan Only		Auto Temp.	Fan	on all units Power

Mode:

AC or Fan

Temp. Up

	Temp. Down	Timer
	Temp. Down	On / Off
		On / Off

Parts

Fan Speed:

High / Low

Setting Mode/Function

Not available on all units

Press the MODE button to select the required working mode:Automatic, Cooling, Fan or Heating (Heating is only available for ALD-12,000EH).The green indicator illustrating your selected mode lights up. It is recommended to select Cooling or Heating mode and set your desired temperature, as the Auto mode has a preset temperature (please see below) that cannot be changed.

The indicators of the functions in progress come on at the same time, e.g. Cool and Lo = Cooling mode with Low fan speed.

Auto Mode

When this mode is selected, the unit is preset to the following temperature settings and unit will only start to:

•Cool when room temperature is higher than 75ºF

•Heat when room temperature is lower than 68ºF (ALD-12,000EH only)

If room temperature is between 68ºF and 75ºF, unit will stay in Fan mode. Again, when in Auto Mode, the temperature settings cannot be changed.

Setting the Temperature in Cooling or Heating Mode

The display window’s default is to display the ambient room temperature. The green indicator light under RT is on. (RT = Room Temperature)

To set your desired temperature, press the Temperature up or down buttons (ranging from 64ºF to 90ºF). Each press will increase or decrease your set temperature by 1ºF. When pressing the temperature up or down buttons, the window will change to display your set temperature.At this time, the green indicator will light under ST (Set Temperature). Once the temperature up or down buttons is released, the window will return to displaying the ambient temperature after a second.

Note: When unit is in the following modes: Auto, Cool, or Heat - the compressor will cool/heat the room to reach the set temperature. Once the ambient temperature has reached the set temperature, the compressor will stop and unit will run in Fan mode. To conserve energy, the compressor will not start immediately after a couple degrees

1.	Control Panel	5.	Air Filter
2.	Cooling Air Outlet	6.	Air Inlet
3.	Handle	7.	Exhaust Air Outlet
4.	Castors	8.	Cord Hanger
		9.	Water Stopper (Rubber Plug Inside)

Accessories

10.	Adaptor - for insertion over the	13
	hose and into the back of the
	air conditioner	10
		10
11.	Exhaust Hose	12
		12

12.Foam Strip - for filling the open window space and with a hole for

connection to the exhaust hose	11

13.Foam Strip - for filling the open window space

increase or decrease, but will wait for a 5ºF allowance. For example:

In Cooling Mode with a set temperature of 70ºF

When compressor first stops after reaching 70ºF, unit will auto-switch to Fan.

Compressor will start cooling again when ambient temperature increases to 75ºF or above.

In Heating Mode with a set temperature of 72ºF

When compressor first stops after reaching 72ºF, unit will auto-switch to Fan. Compressor will start heating again when ambient temperature drops to 67ºF or below.

In Auto Mode (with preset temperature of 68ºF for heat and 75ºF for cool)

Compressor will start cooling again when ambient temperature reaches above 80ºF or will start heating when ambient temperature drops below 63ºF.

14.Round Connector - to be used between hose and window kit or between hose and wall

15.Cap for Round Connector

16.Remote Control

(Electronic control models only)

ALD-1 2, ALD-12 specifications

Amcor ALD-1 and ALD-12 are state-of-the-art solutions in the field of packaging technology, specifically designed for the food and beverage industry. Renowned for their innovative approach to flexible packaging, these products have revolutionized how manufacturers approach sustainability and efficiency in packaging design.

The Amcor ALD-1 is known for its highly versatile properties, making it suitable for a wide range of applications, including pouches, films, and bags. This product is built with advanced materials that offer excellent barrier performance, ensuring that the contents remain fresh for extended periods. One of the standout features of the ALD-1 is its ability to effectively block moisture, oxygen, and light, thereby enhancing the shelf life of various products, from snacks to liquids.

On the other hand, the Amcor ALD-12 is an evolution in the ALD series, offering even greater functionality and sustainability. This product is designed with a focus on eco-friendliness, featuring materials that are not only recyclable but also produced utilizing energy-efficient processes. The ALD-12 boasts improved seal integrity, which is critical for maintaining product freshness and consumer safety. Its user-friendly design allows for easy handling during manufacturing and distribution, making it a favorite among manufacturers.

Both the ALD-1 and ALD-12 are produced using advanced co-extrusion technology, which enables the melding of different materials into a single, multi-layer structure. This process enhances the overall performance of the packaging while reducing the need for additional layers that can increase waste. Additionally, these products employ proprietary polymer blends that provide superior mechanical strength and thermal stability, making them suitable for various packaging machinery.

Amcor places a strong emphasis on sustainability and market adaptability. The ALD-1 and ALD-12 are readily customizable, allowing brands to create packaging that reflects their identity while meeting market demand. The ability to print high-quality graphics directly onto the packaging surface presents an opportunity for increased brand visibility and consumer engagement.

In conclusion, the Amcor ALD-1 and ALD-12 represent cutting-edge advancements in flexible packaging. Their formidable characteristics, focused on performance, sustainability, and versatility, make them ideal solutions for modern packaging needs. As the industry continues to evolve, Amcor remains a front-runner, facilitating innovative approaches to packaging that align with environmental goals and consumer expectations.