Install Gas Log Heater

	1/2" Gas Supply
	1/2" x 3/8" Shut-Off Valve
	3/8" Nipple
	3/8" Union
	3/8"
	Nipple
	FP598
Fig. 6	Typical gas supply line.

1.Connect a shutoff valve, union and any required approved fittings (See NOTE below) between the valve and the gas line.

Access to the gas line on the UVSRC Series firebox is made through the left or right side of the firebox.

From the inside of the firebox, locate the knockout on the firebrick - be sure you are on the appropriate or gas line side of the firebox. Using a flat bladed screwdriver or small chisel and hammer, carefully tap around the knockout until it loosens and falls out.

2.Install the Vent-Free Gas Log Heater exactly as

described in the instructions for the heater. If, for any reason, you do not have these instructions, contact your dealer or manufacturer for another copy.

NOTE: The gas line connection to the log set can be made with 3/8" copper tubing approved for propane or natural gas, 1/2" rigid pipe, or an approved flex connec- tor. Because some municipalities have additional local codes, it is always best to consult your local authority.

U.S. INSTALLATIONS — Follow local codes and the National Fuel Gas Code ANSI Z223.1.

Always check for gas leaks with a mild soap and water solution. Do not use an open flame for leak testing.

When using copper or flex connector, use only ap- proved fittings. Always provide a union so that the gas line can easily be disconnected for burner or fan servicing. See gas specifications for pressure details and ratings.

20002068

UVSRC Series Firebox

Electrical Connection

The UVSRC36/42 with optional fan requires 120VAC electrical hook-up.

CAUTION: All wiring should be done by a qualified electrician and shall be in compliance with all local, city and state building codes. Before making the electrical connection, make sure that the main power supply is disconnected. The firebox, when installed, must be electrically grounded in accor- dance with local codes or, in the absence of local codes, with the National Electrical Code ANSI/NFPA 70 (latest edition).

EB1 Receptacle Hook-Up

Wiring should be installed by a certified electrician.

Turn off circuit breaker before wiring models.

Once the firebox is secured, complete wiring the fan kit. Remove knockout in the center of the back of the EB1 and install listed cable clamps. Feed electrical wire through cable clamp leaving approximately 6" of wire exposed through the EB1. Secure the cable clamp to the wire.

Attach white wire from power source to one wire of receptacle and secure with a nut. Attach black wire from power source to the other wire of the receptacle and secure with a nut. Be sure nuts are tightened securely.

Secure the EB1 assembly to the inside of the electrical box cover plate using 2 screws. Attach the cover to the face of the EB1 while being careful to position the excess wire completely within the EB1. Attach the coverplate to the firebox. (Fig. 7)

	Inside	Electrical Box
		Electrical Box
	Front
	of Unit
		(Left
		Side)
	Outside
		of	Unit
		of
		Front
			FP580
Fig. 7	Junction box (EB-1) hook-up.
			7

UVSRC36, UVSRC42 specifications

Majestic Appliances has made a significant impact in the world of kitchen innovation with its UVSRC series, specifically the UVSRC36 and UVSRC42 models. These high-performance units are designed to elevate the experience of outdoor cooking and entertaining, providing both functionality and style.

One of the standout features of the UVSRC36 and UVSRC42 is their precise temperature control. Equipped with advanced infrared grilling technology, these models ensure that heat is evenly distributed across the cooking surface. This allows for consistent cooking results, whether you’re searing steaks, grilling vegetables, or slowly roasting meats. The intuitive temperature settings enable users to select the perfect cooking temperature with ease.

Another major highlight of these grills is their generous cooking space. The UVSRC36 offers an impressive area, ideal for hosting outdoor gatherings and preparing meals for large groups. The UVSRC42 provides even more space, accommodating larger cuts of meat and additional side dishes. Both models are designed with multiple burners, allowing for simultaneous cooking and enhanced versatility.

Durability and longevity are also at the forefront of Majestic’s design philosophy. Both models are constructed from high-grade stainless steel, providing resistance against the elements while ensuring a sleek aesthetic. The materials used not only enhance the appliance's longevity but also make for easy cleaning and maintenance.

Safety features have not been overlooked either. With an integrated ignition system and safety shut-off valves, users can grill with peace of mind, knowing that modern safety standards have been met. These features contribute to a worry-free cooking experience, whether you are a novice or a seasoned grill master.

Additionally, the UVSRC series incorporates an advanced ventilation system, ensuring that smoke is effectively removed from the cooking area. This leaves your outdoor space pleasant and smoke-free, allowing for uninterrupted dining and entertaining.

Majestic Appliances also understands that aesthetics matter. Both the UVSRC36 and UVSRC42 boast a sleek, contemporary design that fits flawlessly into any outdoor kitchen or patio setup. Their polished stainless steel finish reflects a modern style, enhancing the overall look of your outdoor living area.

In summary, Majestic Appliances UVSRC36 and UVSRC42 stand out with their combination of advanced grilling technologies, generous cooking space, durability, safety features, effective ventilation, and stylish design. These appliances not only meet the demands of outdoor cooking enthusiasts but also raise the standard for what a high-performing grill should be. Whether you're grilling for friends or practicing your culinary skills, these models deliver an exceptional grilling experience.