Intel Desktop Board D975XBX2 Product Guide
Installing and Removing a Processor
Instructions on how to install the processor on the desktop board are given below.
Installing a Processor
CAUTION
Before installing or removing the processor, make sure that AC power has been removed by unplugging the power cord from the computer; the standby power LED should not be lit (see Figure 3 on page 21). Failure to do so could damage the processor and the board.
To install a processor, follow these instructions:
1.Observe the precautions in "Before You Begin" on page 25.
2.Open the socket lever by pushing the lever down and away from the socket (see Figure 7, A and B).
Figure 7. Lift Socket Lever
3. Lift the load plate (Figure 8, A). Do not touch the socket contacts (Figure 8, B).
Figure 8. Lift the Load Plate
30
