Kompernass KH 2222 manual

Page 5

any container filled with water – such as e.g. vases – on the components.

Attention!

If water runs into the components, it can cause irrepara- ble damage!

Warning!

In this case there is additionally also a fire risk!

The technical components of the surround sound system are designed for temperatures between 5º C and 35º C. Therefore only use the surround sound system in this tem- perature range.

Attention!

This could, otherwise, cause malfunctions or damage to the surround sound system!

Place all components of the surround sound system on a surface, which does not vibrate and which is flat and sta- ble. You thus prevent the components from falling down and being damaged.

No liability/guarantee is assumed for damages to the surround sound system and its components, which arise as a result of

Effects of moisture

Water which has penetrated into the unit

Overheating

Falling/being dropped!

Do not bend and squash the power cord, the speaker ca- bles and the data cable. Lay all cables so that they are not steppe on.

Attention!

Otherwise the cables can be damaged and this will cause malfunctions to the surround sound system.

Warning!

If the power cord has been damaged there is the risk of an electric shock!

Therefore never try to repair a damaged power cord your- self! Repairs should be carried out solely by a qualified electrician or by our service partners. The addresses of our service partners can be found on the guarantee card. The guarantee is enclosed in the surround sound system.

Note:

As long as the surround sound system is plugged into a power socket, it is not free of electrical current. This also applies when the surround sound system has been switched off. Take the mains plug of the surround sound system out of the power socket if it is not to be used for a longer period of time. This avoids unnecessary power consumption.

KH 2222

5

Image 5
Contents Operating Instructions Page Preparing the Surround Sound System for Operation IndexApplication and Function Technical DataScope of delivery Page Front of center speaker Control Elements and DisplaysBack of center speaker Back of subwooferRemote control Unpacking the components Preparing the remote control for operationPositioning the speakers and the subwoofer Connect speakers and subwoofer... Connection via . channel/audio outputs Using the Surround Sound System Functions during operation Set the main volumeSet the volume of individual speakers Rectifying Malfunctions Other malfunctions No surround soundPage