Amcor A12000EH owner manual Emptying The Water Container

Page 11

Emptying The Water Container

This air conditioning does not require emptying of the water container, except prior to season end storage.

This portable AC features the

Innovative AutoDrain NanoMist Technology

Very little excess water should accumulate. During the process of cooling, some of the water accumulated is actually used to cool the unit internally, making it run more efficiently. Both this evaporative technology and Innovative AutoDrain NanoMist Technologyare features not found in most portable air conditioners.

Switch off the unit and remove the plug from the outlet.

Position a flat container or dish on the floor under the drain hole. Do not allow the water to drip continuously into the container as it might easily overflow.

Remove the drain knob.

Remove the rubber plug, the water will flow in the container. When this is nearly full, replace the plug to stop the water flow and empty it. Repeat this process until all water has been removed.

Replace the rubber plug into the drain hole firmly, the water full led should not flash any longer.

Replace the drain knob.

Rubber plug

Drain knob

9

Image 11
Contents Portable Air Conditioner Table of Contents Thank You Safety InstructionsReminder SafetySpecifications Parts Only Required For Disassembly AutoDrain NanoMist Technology AssemblyPositioning Installing Exhaust Hose to Window Slide BarFan Speed Setting the TimerSetting the Operating Mode OperationAir flow Remote controlEmptying The Water Container Switch off the unit and remove the plug from the outletFilter CleaningInstallation of Carbon Filter HousingStorage Troubleshooting Page Product Portable Air Conditioner One Year Limited Warranty 5 Years for Compressor OnlyManual del propietario Índice Instrucciones de seguridad AgradecimientosRecordatorio SeguridadModelo NanoMaxA12000EH EspecificacionesPartes Paso requerido para el desarmado únicamente Ensamblaje de la función AutoDrain NanoMist TechnologyPosicionamiento Velocidad del ventilador FuncionamientoAjuste del reloj Ajuste del modo de funcionamientoImportante Unidad de control remotoFlujo de aire Apague la unidad y retire el tapón de la salida Vaciado del recipiente de aguaFiltro LimpiezaInstalación de filtro de carbón CubiertaAlmacenaje Problema Causa Solución Identificación y resolución de problemasPage 02/2008