Surround Assembly, Blower Installation | Jotul GI 425 DV instruction

Left Breastplate

		Right Breastplate	M6 x 12 Hex Bolt, (2)
			M6 x 12 Hex Bolt, (2)
			M6 x 10 Hex Bolt, (2)
			Set Screw
Plumb
Adjustment
Shim (2)	Right		Left Leg
	Right		Left Leg
	Leg

Figure 24.

Assemble the

Surround Panels.

Hanger Tabs, 4 (pre-installed)

Surround Assembly

1.Layout the parts. Place the castings face down on a protective surface such as carpeting, blankets or a sheet of cardboard.

2.Attach the Breastplates together using two M6 x 10 hex head flange bolts. Do not tighten. Use the hex key found in the Hardware Bag to adjust the set screw until a flush fit is attained, then tighten the bolts.

3.Attach the Leg panels to the Breastplates:

The Legs must be oriented with the Hanger Tabs on the inside edges as in the drawing above. Use two M6 x 12 hex head flange bolts to attach the Legs to the Breastplate assembly.

4.Adjust plumb if necessary. Lift the surround assembly upright and check the plumb of the legs and breastplates. Look at the assembly from the side; the breastplates and legs should be aligned straight. If the assembly is bowed, loosen the attachment bolt enough to insert a shim as shown in the detail above, then re- tighten.

5.If you will be installing the optional Wide Surround Panels, use the instructions included with that kit.

6.Attach the Assembly to the Firebox. Lift the entire assembly upright and position it in front of the insert firebox. The four hanger tabs on the surround legs must engage with the adjacent holes in the two brackets on either side of the firebox opening. The surround will easily engage with these brackets if the firebox is slightly proud of the fireplace opening.

Hang the surround assembly on the firebox and push the entire unit into position so that the surround is flush against the fireplace face.

Blower Installation

1.Run the 10 ft. power cord out from the fireplace to the nearest grounded power outlet.

2.With the Speed Control in either the HI or LOW position, the fan will power on when the firebox comes up to operating temperature. (approxi- mately 10 -20 minutes). See the Operation section for further details.

Blower Power Requirement

The blower must be electrically grounded in accor- dance with local codes or, in the absence of local codes, with the current NFPA 70- National Electrical Code or CSA C22.1-Canadian Code.

Athree-prong (grounding) power supply plug is included for protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. DO NOT CUT OR REMOVE

THE GROUNDING PRONG FROM THE PLUG.

BLOWER

GREEN
WHITE	BLACK	RED
	BLACK	RED

BLACK

SNAPSTAT

POWER	BLACK	WHITE	RED
SUPPLY
Figure 25.
		SWITCH
Blower Wiring Diagram	HI	OFF	LO

GI 425 DV specifications

The Jotul GI 425 DV is a beautifully designed gas stove that blends traditional aesthetics with modern technology, making it a popular choice for homeowners seeking warmth and style. This versatile unit is part of the Jotul brand’s renowned range of gas appliances, allowing users to enjoy the charm of a fire without the hassle of wood.

One of the standout features of the Jotul GI 425 DV is its striking design. It is available in various finishes, including a classic black or a more contemporary white enamel, enabling it to fit seamlessly into a variety of interior decor styles. The large glass door provides a clear view of the flame, enhancing the ambiance of any room while also allowing for easy monitoring of the fire.

In terms of performance, the Jotul GI 425 DV is engineered for efficiency. The stove utilizes a Direct Vent system, which ensures that air from outside is drawn in for combustion, while exhaust gases are expelled outside. This helps to maintain a comfortable indoor environment without compromising air quality. Additionally, the stove offers adjustable flame height and heat output, allowing users to tailor the warmth to their needs.

The appliance is equipped with advanced technology, such as a standing pilot light and an igniter, which ensures quick and reliable starts, even during colder months. The internal heat exchanger distributes warmth evenly throughout the room, enhancing heating efficiency. This model also features a remote control option, enabling users to adjust settings from the comfort of their sofa.

The Jotul GI 425 DV is designed to meet modern environmental standards, incorporating a low-emission gas burner system. This means it produces fewer pollutants while providing the same amount of heat, making it a more eco-friendly choice compared to traditional wood stoves.

Another important characteristic of the Jotul GI 425 DV is its safety features. With a robust build and advanced safety shut-off systems, users can enjoy peace of mind while using the stove, knowing that their home is safe.

In conclusion, the Jotul GI 425 DV gas stove combines elegant design, cutting-edge technology, and efficient performance. With its customizable features and environmental considerations, it is an ideal choice for anyone looking to add both warmth and style to their living space while benefiting from the convenience of gas heating.