Fujitsu Installation and Maintenance Guide for AOU24RML and AOU36RML Air Conditioners
Page 15
Guide rail

Cleaning the dust collection unit

4. Install the unit.

(The above figure is only for reference, so the intake grille is not included.)

1Align the two ends of the dust collec- tion unit with the guide rail and slide

in.

2Slide in until it clicks.

“Click”

“Click”

●Please ensure that the dust collection unit is completely dry before installing.

●After installing the dust collection unit, please en- sure that it has been inserted fully into its place. If it has not been installed correctly, the OPERATION indicator lamp (red) and the TIMER indicator lamp (green) will flash, and Air Cleaning will stop.

5.Install the air filter.

●Please consult instructions for cleaning the air filter on page 12.

6.Close the intake grille.

Push the intake grill in at 4 points (the two ends of its lower side as well as two center points of the lower side, as shown in the figure) to close it.

Please ensure that the intake grille is closed properly.

●If, after cleaning the dust collection unit, the opera- tion indicator lamp and the timer indicator lamp flash during Air Cleaning, please ensure that the unit is not damp and that the intake grille is prop- erly closed.

●If, after having checked that the unit is fully dry and that the intake grille is closed properly, the indica- tor lamps continue to flash, the dust collection unit may be damaged. Please consult an authorised dealer to obtain a replacement.

WARNING!

●Be sure the Intake Grille (Fig. 1 9) is installed se- curely.

En-14

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Page Safety Precautions ContentsName of Parts Auto Changeover Features and FunctionsPreparation To Set the Fan Speed Press the FAN Control button To Select Mode Operation Press the Start / Stop button JOperation To Set the Thermostat Press the SET TEMP. buttons FAbout Auto Changeover Operation About Mode OperationAir cleaning AIR Cleaning OperationPress the AIR Clean button K If you wish to stop Air CleanTimer Operation During Heating operation Sleep Timer OperationTo Cancel the Timer About the Sleep TimerTypes of Air flow Direction Setting Adjusting the Direction of AIR CirculationVertical Air Direction Adjustment Press the SET button L Right-Left Adjustment Adjust the Right-Left louversTo select Swing Operation Press the Swing button M Swing OperationCoil DRY Operation Manual Auto OperationCleaning and Care Filter on the right Cleaning the Plasma AIR Cleaning FilterRegarding the Air Cleaning check function Open the intake grille and remove the airInstall the unit Install the air filterClose the intake grille Remove the dust-collecting unit Install the dust-collection unitInstall the Air-cleaning and Deodorizing filter Install the air filter and close the intake grilleSymptom Problem TroubleshootingOperation and Performance Event of Power InterruptionSymptom Items to check Operating TipsTemperature and Humidity Range Multi-type Air conditionerSimultaneous Use of Multiple Units

ASU9RMLQ ASU12RMLQ AOU24RML AOU36RML specifications

Fujitsu is a prominent player in the HVAC industry, delivering energy-efficient and advanced climate control solutions. Among their extensive product lineup, the ASU9RMLQ, ASU12RMLQ, AOU24RML, and AOU36RML represent cutting-edge technology specifically designed to cater to diverse cooling and heating needs in residential and commercial spaces.

The Fujitsu ASU9RMLQ and ASU12RMLQ are wall-mounted indoor units that are well-suited for smaller residential settings. These models are known for their sleek design, ensuring they blend seamlessly into any environment. Their main features include a high energy efficiency rating, achieving SEER ratings of up to 18, which translates to significant cost savings on energy bills. Both models are equipped with Inverter technology, allowing them to adjust the compressor speed as needed, thus providing consistent temperature control while minimizing energy consumption.

Additionally, these indoor units are designed with advanced filtration systems that enhance air quality by removing dust, allergens, and other pollutants. The easy-to-use remote controls enable users to adjust settings conveniently, while the quiet operation ensures minimal disruption during use.

On the other hand, the AOU24RML and AOU36RML are outdoor units designed to provide robust cooling and heating performance. They are engineered to work in conjunction with their respective indoor counterparts, offering a comprehensive climate control system. The AOU24RML is capable of cooling larger spaces with its powerful output, while the AOU36RML excels in extensive areas, making it ideal for commercial applications.

Both outdoor units feature enhanced durability, built to withstand various weather conditions. They employ advanced compressor technology that optimizes performance and energy efficiency. The incorporation of smart technology allows for remote management through smartphone applications, adding an extra layer of convenience for users.

In summary, the Fujitsu ASU9RMLQ, ASU12RMLQ, AOU24RML, and AOU36RML are distinguished by their ability to provide effective and energy-efficient climate control. With features such as Inverter technology, advanced filtration, and responsive control systems, these units represent a smart investment for anyone looking to enhance their indoor environment while being mindful of energy consumption. Whether for residential or commercial spaces, these Fujitsu models deliver reliability and innovation in HVAC solutions.
Top Page Image Contents