Fujitsu ASU9RMLQ ASU12RMLQ AOU24RML AOU36RML manual Cleaning and Care

Page 13

CLEANING AND CARE

WARNING!

CAUTION!

Before cleaning the plasma filter unit, be sure to turn off the power supply to the air conditioner. Electric shock may result.

●Make sure the plasma filter unit is properly mounted before cleaning or performing other tasks on it. If the unit is not properly mounted, it could fall off and cause damage or injury.

●You can be injured if you touch the heat exchanger when removing or installing the plasma filter unit. Do not insert your fingers between the plasma filter unit and the heat exchanger.

Cleaning the Intake Grille

1. Remove the Intake Grille.

1Place your fingers at both lower ends of the grille panel, and lift forward; if the grille seems to catch partway through its movement, continue lifting up- ward to remove.

2Pull past the intermediate catch and open the Intake Grill wide so that it become horizontal.

Intake Grille

Intake Grille

Mounting

shaft

Knob

2. Clean with water.

Remove dust with a vacuum cleaner; wipe the unit with warm water, then dry with a clean, soft cloth.

3. Replace the Intake Grille.

1Pull the knobs all the way.

2Hold the grille horizontal and set the left and right mounting shafts into the bearings at the top of the panel.

Cleaning the Air Filter

1. Open the Intake Grille, and remove the air filter.

Lift up the air filter’s handle, disconnect the two lower tabs, and pull out.

Air filter handle

2. Remove dust with a vacuum cleaner or by washing.

After washing, allow to dry thoroughly in a shaded place.

3.Replace the Air Filter and close the Intake Grille.

1 Align the sides of the Air Filter with the panel, and push in fully, making sure the two lower tabs are re- turned properly to their holes in the panel.

2Close the Intake Grille.

(For purposes of example, the illustration shows the unit without Intake Grille installed.)

Intake Grille

Mounting shaft Bearing

● Dust can be cleaned from the Air Filter either with a

vacuum cleaner, or by washing the filter in a solution of

mild detergent and warm water. If you wash the filter, be

Knob

Intake Grille

Mounting

shaft

Knob

sure to allow it to dry thoroughly in a shady place before

reinstalling.

● If dirt is allowed to accumulate on the Air Filter, air flow

will be reduced, lowering operating efficiency and in-

creasing noise.

● During periods of normal use, the Air Filters should be

cleaned every two weeks.

●When used for extended periods, the unit may accumulate dirt inside, reducing its performance. We recommend that the unit be inspected regularly, in addition to your own cleaning and care. For more information, consult authorized service personnel.

●When cleaning the unit’s body, do not use water hotter than 108 °F, harsh abrasive cleansers, or volatile agents like benzene or thinner.

●Do not expose the unit body to liquid insecticides or hairsprays.

●When shutting down the unit for one month or more, first allow the fan mode to operate continuously for about one-half day to allow internal parts to dry thoroughly.

En-12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Page Safety Precautions ContentsName of Parts Auto Changeover Features and FunctionsPreparation Operation To Select Mode Operation Press the Start / Stop button JTo Set the Thermostat Press the SET TEMP. buttons F To Set the Fan Speed Press the FAN Control buttonAbout Auto Changeover Operation About Mode OperationPress the AIR Clean button K AIR Cleaning OperationIf you wish to stop Air Clean Air cleaningTimer Operation To Cancel the Timer Sleep Timer OperationAbout the Sleep Timer During Heating operationVertical Air Direction Adjustment Press the SET button L Adjusting the Direction of AIR CirculationRight-Left Adjustment Adjust the Right-Left louvers Types of Air flow Direction SettingCoil DRY Operation Swing OperationManual Auto Operation To select Swing Operation Press the Swing button MCleaning and Care Regarding the Air Cleaning check function Cleaning the Plasma AIR Cleaning FilterOpen the intake grille and remove the air Filter on the rightInstall the air filter Install the unitClose the intake grille Install the Air-cleaning and Deodorizing filter Install the dust-collection unitInstall the air filter and close the intake grille Remove the dust-collecting unitSymptom Problem TroubleshootingSymptom Items to check Event of Power InterruptionOperating Tips Operation and PerformanceMulti-type Air conditioner Temperature and Humidity RangeSimultaneous Use of Multiple Units

ASU9RMLQ ASU12RMLQ AOU24RML AOU36RML specifications

Fujitsu is a prominent player in the HVAC industry, delivering energy-efficient and advanced climate control solutions. Among their extensive product lineup, the ASU9RMLQ, ASU12RMLQ, AOU24RML, and AOU36RML represent cutting-edge technology specifically designed to cater to diverse cooling and heating needs in residential and commercial spaces.

The Fujitsu ASU9RMLQ and ASU12RMLQ are wall-mounted indoor units that are well-suited for smaller residential settings. These models are known for their sleek design, ensuring they blend seamlessly into any environment. Their main features include a high energy efficiency rating, achieving SEER ratings of up to 18, which translates to significant cost savings on energy bills. Both models are equipped with Inverter technology, allowing them to adjust the compressor speed as needed, thus providing consistent temperature control while minimizing energy consumption.

Additionally, these indoor units are designed with advanced filtration systems that enhance air quality by removing dust, allergens, and other pollutants. The easy-to-use remote controls enable users to adjust settings conveniently, while the quiet operation ensures minimal disruption during use.

On the other hand, the AOU24RML and AOU36RML are outdoor units designed to provide robust cooling and heating performance. They are engineered to work in conjunction with their respective indoor counterparts, offering a comprehensive climate control system. The AOU24RML is capable of cooling larger spaces with its powerful output, while the AOU36RML excels in extensive areas, making it ideal for commercial applications.

Both outdoor units feature enhanced durability, built to withstand various weather conditions. They employ advanced compressor technology that optimizes performance and energy efficiency. The incorporation of smart technology allows for remote management through smartphone applications, adding an extra layer of convenience for users.

In summary, the Fujitsu ASU9RMLQ, ASU12RMLQ, AOU24RML, and AOU36RML are distinguished by their ability to provide effective and energy-efficient climate control. With features such as Inverter technology, advanced filtration, and responsive control systems, these units represent a smart investment for anyone looking to enhance their indoor environment while being mindful of energy consumption. Whether for residential or commercial spaces, these Fujitsu models deliver reliability and innovation in HVAC solutions.
Top Page Image Contents