Fujitsu ASU9RMLQ ASU12RMLQ AOU24RML AOU36RML manual Cleaning the Plasma AIR Cleaning Filter

Page 14

CLEANING THE PLASMA AIR CLEANING FILTER

WARNING!

CAUTION!

Before cleaning the plasma filter unit, be sure to turn off the power supply to the air conditioner. Electric shock may result.

●Make sure the plasma filter unit is properly mounted before cleaning or performing other tasks on it. If the unit is not properly mounted, it could fall off and cause damage or injury.

●You can be injured if you touch the heat exchanger when removing or installing the plasma filter unit. Do not insert your fingers between the plasma filter unit and the heat exchanger.

Regarding the Air Cleaning check function

●This function is illustrated by the flashing of the AIR CLEAN indicator lamp (green), indicating that the unit requires maintenance.

After Air Cleaning Mode has been in use for approximately 400 hours, the AIR CLEAN indicator lamp (green) will begin to slowly flash (approximately once every 7 seconds). When this occurs, the unit requires maintenance.

After Air Cleaning Mode has been in use for approximately 500 hours, the AIR CLEAN indicator lamp (green) will begin to flash quickly (approximately once every 3 seconds). At this point, Air Cleaning will cease functioning. Please carry out appropriate maintenance for the unit.

●Please carry out unit maintenance every 6 months.

●If a squeaking or chirping sound is heard, unit maintenance needs to be carried out, even if the AIR CLEAN indicator lamp (green) is not flashing.

Cleaning the dust collection unit

1. Open the intake grille and remove the air

2. Remove the dust collection unit.

filter on the right.

 

● Please consult the instructions for cleaning the air filter on page 12.

handle

3.Wash with water and dry.

1 Soak the plasma filter unit in warm water (104 to 122 °F) for 10 to 15 minutes. If the plasma filter unit is extremely dirty, extremely dilute a mild synthetic laun- dry detergent (low alkalinity or isotope detergent) to 15 times the standard concentration and allow the

plasma filter unit to soak in it.

2Gently move up and down and to the right and left. A soft sponge can also be used to wipe the surface.

3Rinse with clean water.

4Shake the plasma filter unit to drain off the water. (If the plasma filter unit is extremely dirty, repeat Steps 1 through 4 two or three more times.)

5Place the plasma filter unit in the shade and allow it to dry completely.

Securely grasp the dust collection unit by the handle and pull it out (as shown by the arrow).

(The above figure is only for reference, so the intake grille is not included).

●Only use a mild synthetic laundry detergent (low alkalinity or isotope detergent).

●Never disassemble the plasma filter unit.

●Never soak the plasma filter unit in hot water.

●Never wipe the plasma filter unit with a scrub brush or other hard or abrasive items. This will damage the honey comb filter.

●Never insert a brush into the inside of plasma filter unit for washing. This will damage the internal parts and cause malfunctioning of the plasma filter unit.

●Never use dryer or other device to blow hot air on the plasma filter unit. This will cause deformation or other damage.

●Before re-installing the unit, please wait until it is completely dry. If the unit is installed when still wet and then put into operation, the OPERATION indi- cator lamp (red) and the TIMER indicator lamp (green) will flash and Air Cleaning will stop.

En-13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Contents Safety PrecautionsName of Parts Features and Functions Auto ChangeoverPreparation To Set the Thermostat Press the SET TEMP. buttons F To Select Mode Operation Press the Start / Stop button JOperation To Set the Fan Speed Press the FAN Control buttonAbout Mode Operation About Auto Changeover OperationIf you wish to stop Air Clean AIR Cleaning OperationPress the AIR Clean button K Air cleaningTimer Operation About the Sleep Timer Sleep Timer OperationTo Cancel the Timer During Heating operationRight-Left Adjustment Adjust the Right-Left louvers Adjusting the Direction of AIR CirculationVertical Air Direction Adjustment Press the SET button L Types of Air flow Direction SettingManual Auto Operation Swing OperationCoil DRY Operation To select Swing Operation Press the Swing button MCleaning and Care Open the intake grille and remove the air Cleaning the Plasma AIR Cleaning FilterRegarding the Air Cleaning check function Filter on the rightClose the intake grille Install the unitInstall the air filter Install the air filter and close the intake grille Install the dust-collection unitInstall the Air-cleaning and Deodorizing filter Remove the dust-collecting unitTroubleshooting Symptom ProblemOperating Tips Event of Power InterruptionSymptom Items to check Operation and PerformanceSimultaneous Use of Multiple Units Temperature and Humidity RangeMulti-type Air conditioner

ASU9RMLQ ASU12RMLQ AOU24RML AOU36RML specifications

Fujitsu is a prominent player in the HVAC industry, delivering energy-efficient and advanced climate control solutions. Among their extensive product lineup, the ASU9RMLQ, ASU12RMLQ, AOU24RML, and AOU36RML represent cutting-edge technology specifically designed to cater to diverse cooling and heating needs in residential and commercial spaces.

The Fujitsu ASU9RMLQ and ASU12RMLQ are wall-mounted indoor units that are well-suited for smaller residential settings. These models are known for their sleek design, ensuring they blend seamlessly into any environment. Their main features include a high energy efficiency rating, achieving SEER ratings of up to 18, which translates to significant cost savings on energy bills. Both models are equipped with Inverter technology, allowing them to adjust the compressor speed as needed, thus providing consistent temperature control while minimizing energy consumption.

Additionally, these indoor units are designed with advanced filtration systems that enhance air quality by removing dust, allergens, and other pollutants. The easy-to-use remote controls enable users to adjust settings conveniently, while the quiet operation ensures minimal disruption during use.

On the other hand, the AOU24RML and AOU36RML are outdoor units designed to provide robust cooling and heating performance. They are engineered to work in conjunction with their respective indoor counterparts, offering a comprehensive climate control system. The AOU24RML is capable of cooling larger spaces with its powerful output, while the AOU36RML excels in extensive areas, making it ideal for commercial applications.

Both outdoor units feature enhanced durability, built to withstand various weather conditions. They employ advanced compressor technology that optimizes performance and energy efficiency. The incorporation of smart technology allows for remote management through smartphone applications, adding an extra layer of convenience for users.

In summary, the Fujitsu ASU9RMLQ, ASU12RMLQ, AOU24RML, and AOU36RML are distinguished by their ability to provide effective and energy-efficient climate control. With features such as Inverter technology, advanced filtration, and responsive control systems, these units represent a smart investment for anyone looking to enhance their indoor environment while being mindful of energy consumption. Whether for residential or commercial spaces, these Fujitsu models deliver reliability and innovation in HVAC solutions.
Top Page Image Contents