Fujitsu AOU18RL, ASU18RL Sleep Timer Operation, About the Sleep Timer, During Heating operation

Page 11

SLEEP TIMER OPERATION

Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operate is stopped.

To Use the SLEEP Timer

While the air conditioner is operating or stopped, press the SLEEP button (Fig. 6 J).

The indoor unit’s OPERATION Indicator Lamp (red) (Fig. 3 5) lights and the TIMER Indicator Lamp (green) (Fig. 3 6) light.

To Change the Timer Settings

Press the SLEEP button (Fig. 6 J) once again and set the time using the TIMER SET ( / ) buttons (Fig. 6 P).

Set the time while the Timer Mode Display is flashing (the flashing will continue about five seconds).

button: Press to advance the time. button: Press to reverse the time.

About five seconds later, the entire display will reappear.

To Cancel the Timer:

Use the TIMER MODE button to select “CANCEL”.

The air conditioner will return to normal operation.

To Stop the Air Conditioner During Timer Operation:

Press the START/STOP button.

About the SLEEP Timer

To prevent excessive warming or cooling during sleep, the SLEEP timer function automatically modifies the thermostat setting in accordance with the set time setting. When the set time has elapsed, the air conditioner completely stops.

During Heating operation:

When the SLEEP timer is set, the thermostat setting is automatically lowered 2 °F every thirty minutes. When the thermostat has been lowered a total of 8 °F, the thermostat setting at that time is maintained until the set time has elapsed, at which time the air conditioner automatically turns off.

During Cooling/Dry operation:

When the SLEEP timer is set, the thermostat setting is auto- matically raised 2 °F every sixty minutes. When the thermo- stat has been raised a total of 4 °F, the thermostat setting at that time is maintained until the set time has elapsed, at which time the air conditioner automatically turns off.

SLEEP timer setting

 

 

 

SLEEP timer setting

 

 

 

 

 

 

2 °F

4 °F

6 °F

8 °F

 

 

 

Set time

 

 

 

 

 

 

 

 

30

 

 

 

 

 

minutes

 

 

 

1 hour

 

 

 

 

 

 

1 hour

 

 

 

 

 

1 hour

 

 

 

2 °F

4 °F

 

 

 

 

30 minutes

Set time

En-8

05L256_9315255013-01_En

8

2005.12.9, 11:49 AM

Image 11
Contents Español Français English Operating ManualSafety Precautions ContentsOperation Timer Super Quiet Coil DRY Especificaciones SpecificationsFiche Technique Inverter Features and FunctionsIndoor Unit Operating Control Panel Fig Manual Auto button Name of PartsPreparation Operation About Auto Changeover Operation About Mode OperationTo Stop Operation Press the START/STOP button R Timer Operation During Cooling/Dry operation Sleep Timer OperationAbout the Sleep Timer During Heating operationTypes of Air flow Direction Setting Adjusting the Direction of AIR CirculationVertical Air Direction Adjustment Press the SET button S Right-Left Adjustment Adjust the Right-Left louversTo select Swing Operation Press the Swing button T Swing OperationCoil DRY Operation Manual Auto OperationCleaning and Care Replace them by two new Air cleaning filters Install the Air cleaning filter set setInstall the two Air filters and close the Intake Grille Replacing dirty Air cleaning filtersSymptom Problem TroubleshootingAuto Restart Event of Power InterruptionOperating Tips Operation and PerformanceTips for saving energy Temperature and Humidity RangeCooling Mode Dry Mode Heating Mode Outdoor temperature Indoor temperature05L2569315255013-01En 2005.12.9, 1149 AM