SWING OPERATION
Begin air conditioner operation before performing this procedure
To select Vertical airflow SWING Operation
Press the AIR FLOW DIRECTION VERTICAL SWING button .
The SWING indicator light (VERTICAL SWING) (orange) will turn on.
In this mode, the UP/DOWN air direction flap will swing automatically to direct the air flow both up and down.
SET 
SWING SET SWING
TIME TEST
ENERGYADJUST RUN ACL
SAVE
To Stop Vertical airflow SWING Operation
Example: When set to vertical swing
Press the AIR FLOW DIRECTION VERTICAL SWING button once again.
The SWING indicator light (VERTICAL SWING) will turn off. Airflow direction will return to the setting before swing was begun.
About Vertical Airflow Swing Operation
●The range of swing is relative to the currently set airflow direction.
Air flow direction set | Range of swing |
|
|
1 | 1 to 3 |
2 | 1 to 3 |
|
|
3 | 2 to 4 |
|
|
4 | 3 to 5 |
5 | 1 to 5 (All range) |
|
|
Air direction range (See page 11, Fig. 8)
●If the swing range is not as desired, use the remote con- trol unit’s AIR FLOW DIRECTION VERTICAL SET button to change the range of swing.
●The SWING operation may stop temporarily when the air conditioner’s fan is not operating, or when operating at very low speeds.
●During use of the Cooling and Dry modes, do not set the air UP/DOWN direction flap, in the Heating range (4 to 5) for long periods of time, since water vapor may con- dense near the outlet port and drops of water may drip from the air conditioner.
To select Horizontal Airflow SWING Operation
Press the AIR FLOW DIRECTION HORIZONTAL SWING button.
The SWING indicator light (HORIZONTAL SWING) (orange) will turn on.
In this mode, the RIGHT/LEFT air direction louvers will swing automatically to direct the airflow both right and left.
SET 
SWING SET SWING
TIME TEST
ENERGYADJUST RUN ACL
SAVE
To Stop Horizontal airflow SWING Operation
Example: When set to horizontal swing
Press the AIR FLOW DIRECTION HORIZONTAL SWING button once again.
The SWING indicator light (HORIZONTAL SWING) will turn off.
Airflow direction will return to the setting before swing was begun.
About Horizontal Airflow Swing Operation
●The range of swing is relative to the currently set airflow direction.
Air flow direction set | Range of swing |
1 | 1 to 5 (All range) |
2 | 1 to 3 |
|
|
3 | 2 to 4 |
|
|
4 | 3 to 5 |
|
|
5 | 1 to 5 (All range) |
|
|
Air direction range (See page 11, Fig.9)
●If the swing range is not as desired, use the remote con- trol unit’s AIR FLOW DIRECTION HORIZONTAL SET but- ton to change the range of swing.
●The SWING operation may stop temporarily when the air conditioner’s fan is not operating, or when operating at very low speeds.