ENERGY SAVE OPERATION
Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
The air conditioner can be operated while keeping energy consumption costs down.
How To Use the ENERGY SAVE OPERATION
1 | Press the START/STOP button |
(if the unit is already operating, proceed to step 2). |
The indoor unit’s OPERATION indicator light (red) will turn on.
SET 
SWING SET SWING
TIME TEST
ENERGYADJUST RUN ACL
SAVE
2 | Press the MASTER CONTROL button to select the |
|
COOL, DRY, *HEAT mode. |
| |
3 | Press the ENERGY SAVE button. | To Cancel the ENERGY SAVE: |
Press the ENERGY SAVE button. | ||
ENERGY SAVE can only be used if the MASTER CONTROL button is used |
|
to select the “COOL”, “DRY” or *“HEAT”.
About the ENERGY SAVE
The air conditioner saves energy costs by controlling the thermostat temperature setting.
*During Heating operation:
The thermostat temperature setting decreases by 2 °F as soon as the ENERGY SAVE button is pressed, and then de- creases by another 2 °F every thirty minutes.
In this manner, energy is saved by continuing to heat at a thermostat temperature of 8 °F less than the setting.
During Cooling/Dry operation:
The thermostat temperature setting increases by 2 °F as soon as the ENERGY SAVE button is pressed, and then increases by another 2 °F after one hour has passed.
In this manner, energy is saved by continuing to cool or dry at a thermostat temperature of 4 °F more than the setting.
ENERGY SAVE setting
2 °F |
| °F 6 | Set temperature | |
4 | °F 8 °F | |||
|
ENERGY | 30 minutes |
SAVE ON | |
| 1 hour |
ENERGY SAVE setting
1 hour
ENERGY
SAVE ON
2 °F
4 °F
Set temperature
1 hour 30 minutes
MANUAL AUTO OPERATION
Use the MANUAL AUTO operation in the event the remote control unit is lost or otherwise unavailable.
How To Use the Main Unit Controls
Press the MANUAL AUTO button on the main unit operating control panel.
To stop operation, press the MANUAL AUTO button once again.
CAUTION!
Do not press the MANUAL AUTO but- ton with wet hands or pointed objects, otherwise an electric shock or malfunc- tion may occur.
●When the air conditioner is operated with the controls on the Main unit, it will operate under the same mode as the AUTO mode selected on the re- mote control unit (see page 8).
●The fan speed selected will be “AUTO”
and the thermostat setting will be 73 °F.