Assembly Instructions, Operating Instructions

ASSEMBLY INSTRUCTIONS

For the HAOF720, your product comes fully assembled. Please skip to the Operating Instructions.

For all other fans, please continue below with the Pre-Assembly Instructions.

Pre-Assembly

Step 1: Remove your fan from inside the box, being careful not to discard any of the items that are needed for assembly.

Base Assembly

Step 1: Insert the body into the base.

Step 2: Tighten the base nut onto the bottom of the body.

Fan Head Assembly

Step 1: Remove protective plastic sleeve from the motor shaft.

Step 2: Position the rear grill over the motor shaft, making sure the circular opening in the center of the rear grill fits over the prongs on the rear housing. Please make sure the rear grill fits securely against the motor housing.

Step 3: Secure the rear grill in its place using the rear grill-mounting nut. Turn this nut clockwise and tighten firmly.

Step 4: FOR HAOF920

Slide the fan blade firmly onto the motor shaft. Make sure that the blade is pushed onto the motor shaft as far as possible before putting on the front grill.

FOR HAOF1220, 1620

Align “D” shaped shaft with the “D” shaped hole in the center of the blade. Slide the fan blade, with the hollowed interior of the blade facing towards the rear of the grill firmly onto the motor shaft, until motor shaft protrudes from the front of the fan blade. Secure the fan blade onto the motor shaft by firmly tightening the fan blade nut.

NOTE: TURN THE FAN BLADE NUT COUNTER-CLOCKWISE

Step 5: Center the front grill by aligning the Holmes logo on the grill hub so it is horizontal and parallel with the floor, making sure that the grill clips are in the open position. Closing the clips will attach the front grill to the rear grill.

OPERATING INSTRUCTIONS

Step 1: Set the fan base on a dry, level surface.

Step 2: Please make sure the Speed Control Knob is in the "O" Off position. Plug the cord into any standard 120-volt A/C outlet.

Step 3: The SPEED is adjusted by moving the knob left or right to the desired setting.

Step 4: The OSCILLATION control knob is located on the top of the fan motor housing. To start oscillation, push control knob down. To stop oscillation, pull control knob up.

ADJUSTMENT INSTRUCTIONS

Tilt Adjustment

To change the tilting angle of the fan head, move the fan head to the desired angle.

CLEANING/MAINTENANCE

Follow these instructions to correctly and safely care for your Holmes table fan. Please remember:

•Always unplug the fan before cleaning or disassembling.

•Do not allow water to drip on or into the fan motor housing.

•Do not use any of the following as a cleaner: gasoline, thinner, or benzine

(See instructions for fan head assembly)

Step 1: To access the fan blade, remove the front grill and the fan blade nut.

Step 2: Clean the fan blade, both front and rear grills with a soft cloth moistened with a mild soap solution.

Step 3: Replace blade, tighten the fan blade nut, and securely fasten the front grill.

Fan Head and Base Cleaning

Using a soft, moist cloth, with or without a mild soap solution, carefully clean the fan base and head. Please use caution around the motor

housing area. Do not allow the motor or other electrical compo- nents to be exposed to water.

HAOF1220, HAOF720, HAOF1620, HAOF920 specifications

The Holmes HAOF series, including the HAOF720, HAOF1220, HAOF1620, and HAOF920, represents a state-of-the-art lineup of oscillating fan heaters, designed to provide effective heating solutions while optimizing energy consumption. Each model combines innovative technology with user-friendly features, catering to various heating needs and preferences.

The HAOF720 is a compact yet powerful heater suitable for smaller spaces. It boasts adjustable heat settings, allowing users to tailor their comfort level. Its oscillating feature helps to distribute heat evenly, ensuring no corner of the room remains cold. Additionally, the HAOF720 includes a safety tip-over switch that automatically turns off the unit if it is knocked over, providing peace of mind for households with pets or children.

Next in the lineup is the HAOF920, which offers a higher heating capacity and extended range. This model is equipped with a turbo fan for enhanced airflow, quickly warming up larger rooms. The HAOF920 also features multiple heat settings and an adjustable thermostat, allowing users to maintain their ideal temperature effortlessly. Its sleek design makes it a stylish addition to any home décor while ensuring functionality is not compromised.

Moving up the range, the HAOF1220 is tailored for those who desire both warmth and a more curated design. It incorporates a ceramic heating element that heats up rapidly, providing efficient warmth while consuming less energy compared to traditional heater models. Like its counterparts, it features oscillation for widespread warmth, but it also includes an innovative remote control, enabling comfortable operation from a distance.

Finally, the HAOF1620 stands out as the most powerful model in the series. With advanced energy-efficient technologies, this heater is perfect for larger areas or spaces that require constant warmth. It combines a digital display with programmable settings, allowing users to set specific heating schedules tailored to their lifestyle. The HAOF1620 also emphasizes safety, with features such as overheat protection and a durable construction designed to withstand prolonged use.

Overall, the Holmes HAOF series offers a blend of efficiency, safety, and user convenience, making them excellent choices for anyone looking to enhance their indoor comfort during colder seasons.