Wall Mount Installation

Refer to Figures 7, 8 and 9 for measurements in order to locate

(4)mounting holes on wall. Figures 7, 8 and 9 are the front views of the heaters.

1.Remove lower louver from casing assembly (2 screws).

2.Remove reﬂector from casing assembly (2 screws).

3.Remove upper louver from casing assembly (2 screws).

		(300 mm)
		(198 mm)
(28 mm)	(51)	(51)

(479 mm)	(559 mm)

(102 mm)

(51 mm

Figure 7 (SR-10T)

(457mm)

(356mm)

(28mm)

(559mm)

(479mm)

(52mm)

(102mm)

(51mm)

(613mm)

(51)	(511mm)	(51)

(28mm)

(479 mm)

(559 mm)

(102 mm)	2” (51 mm)
MIN

Figure 9 (SR-30T)

On Solid Wall

1.After locating mounting holes, attach (4) #10 x 1” (25mm) screws provided into the wall. Do not completely tighten screwheads to the wall, leave a 1/8” (3mm) gap between screwheads and wall.

2.Mount heater onto the (4) screwheads and complete tightening screwheads into the wall.

Attention! Use the following steps to properly align the upper louver and the reﬂector with the heat shield.

a.When replacing upper louver, be sure the bottom lip of upper louver goes behind the heat shield.

b.When replacing reﬂector, be sure the top lip of reﬂector goes in front of the heat shield.

3.Connect the gas line.

On Sheet Rock Wall

1.After locating mounting holes, drill (4) 5/16” (8mm) diameter holes into the wall.

2.Insert (4) plastic expansion anchors provided into the holes.

3.Tighten (4) #10 x 1” (25mm) screws provided into the plastic expansion anchors. Do not completely tighten screwheads to the plastic expansion anchors, leave a 1/8” (3mm) gap between screwheads and plastic expansion anchors.

Figure 8 (SR-18T)

Page 10

16941-5-0907

SR-10T-3 specifications

The Empire Comfort Systems SR-10T-3 is a highly efficient, innovative heating solution designed to meet the demands of modern living. This product exemplifies a commitment to quality, reliability, and user-friendly operation, making it an ideal choice for both residential and commercial spaces.

One of the standout features of the SR-10T-3 is its advanced infrared heating technology. This innovation allows the heater to warm objects and people directly rather than just heating the surrounding air, resulting in quick and efficient heat distribution. This means users can enjoy a comfortable environment almost immediately after turning the unit on, reducing wait times that are typically associated with conventional heating methods.

The design of the SR-10T-3 is another highlight. It boasts a compact and sleek profile that can seamlessly integrate into various settings without taking up excessive space. Moreover, this model is available in multiple finishes to complement any décor, ensuring it not only functions effectively but also enhances the aesthetic of the room.

The SR-10T-3 is equipped with an adjustable thermostat, allowing users to customize their heating experience according to their specific needs. This feature promotes energy efficiency, as it helps prevent unnecessary energy consumption by automatically regulating the temperature. In addition, the heater is designed with convenience in mind, incorporating a safety shut-off feature that activates if the unit overheats or tips over, ensuring peace of mind during use.

Durability is another defining characteristic of the Empire Comfort Systems SR-10T-3. Made with high-quality materials, this heater is built to withstand the rigors of daily use while maintaining optimal performance. Its user-friendly controls and straightforward installation process also contribute to its appeal, making it accessible for anyone looking to enhance their heating solutions.

In conclusion, the Empire Comfort Systems SR-10T-3 is an exceptional choice for those seeking an efficient and stylish heating solution. With its infrared heating technology, adjustable thermostat, and durable construction, it stands out in its category, promising reliability and comfort for years to come. Its thoughtful design and commitment to efficiency make it a noteworthy investment for any heating needs.