Homelite HHC50LP owner manual Service Procedures, Motor

Page 11

SERVICE PROCEDURES

Motor

1.Access ground screw through underside of heater base. Remove ground screw. Disconnect the green motor wire and the green power cord wire from underside of shell (see Figure 6).

2.Remove blue, white, and yellow motor wires from terminal board (see Figure 6).

3.Remove two wire guard screws. Remove wire guard.

4.Set heater on its base. Remove three screws that attach fan guard to heater shell (see Figure 7).

5.Remove motor and fan guard from heater shell. Carefully pull the motor wires from hole in shell (see Figure 7).

6.Use 3.17 mm (1/8") Allen wrench to loosen set- screws which hold fan to motor shaft (see Figure 8).

7.Remove fan. Be careful not to damage the fan blade pitch.

8.Use nut driver to remove three nuts that attach fan guard to motor. Remove fan guard from motor (see Fig- ure 9).

9.Discard old motor.

10.Attach fan guard to new motor with three nuts. Tighten nuts firmly.

11.Place fan onto motor shaft of new motor.

IMPORTANT: When plac- ing fan onto motor shaft, make sure fan hub in posi- tioned away from motor body (see Figure 8). Make sure setscrews are touching back of flat surfaces on motor shaft. Tighten set- screws firmly (4.5-5.7 Nm [40-50inch-pounds]).

Continued

WARNING

Never service heater while it is plugged in, connected to propane supply, operating, or hot. Severe burns and elec- trical shock can occur.

Ground Screw

Wire Guard Screws

Wire Guard

Underside of Heater Base

Terminal Board

Figure 6 - Location of Ground Screw and Wire Guard

Fan Guard Screw

Fan Guard

Hole in Shell for Wires

Figure 7 - Removing Motor and Fan Guard from Heater

Set- screws

Fan Hub

 

Motor Wires

Figure 8 - Removing or Attaching

Figure 9 - Removing or Attaching

Fan from Motor Shaft

Fan Guard from Motor

11

101497

Image 11
Contents Canadian Propane Construction Heater Contents Safety Information Safety Information Product Identification UnpackingSupply TheoryOperation Regulator Position InstallationTo Start Heater Installation Ventilation OperationTo Restart Heater To Stop HeaterDisconnect heater from propane supply tanks Storage MaintenanceTROUBLE- Shooting Observed Fault Possible Cause RemedyMotor Service ProceduresMotor FanIgnitor Removing Ignitor Wire from Piezo IgnitorSpecifications 101497 101497 101497 Call Et à l’entretien Appareil DE Chauffage AU Propane Pour LA ConstructionPAR Mesure DE Sécurité Table DES MatièresAvertissements Suite Nomenclature DES PIÈ CES DÉ BallageEN Propane Principes DENctionnement Avertissement Mise en marche de l’appareil Ventilation FonctionnementPour remettre l’appareil en marche Pour arrê ter l’appareil de chauffageDé brancher l’appareil du ou des ré servoirs de propane Remisage EntretienAnomalie Observé E Cause Probable Remè DE DÉ PannageAnomalie Observé E Cause Probable Moteur Procé Dure D’ENTRETIENDé pose ou fixation du ventilateur sur l’arbre du moteur Moteur suiteAllumeur VentilateurRetrait de la vis de montage et de l’allumeur Allumeur suiteSPÉ Cifications 101497 Composer LE

HHC50LP specifications

The Homelite HHC50LP is a versatile and robust hedge trimmer designed for homeowners and landscaping professionals alike. This reliable tool stands out due to its powerful performance, lightweight design, and user-friendly features, making it an excellent choice for tackling both small and large trimming jobs.

One of the standout characteristics of the HHC50LP is its powerful 2-cycle engine, which delivers exceptional cutting performance while ensuring that the unit remains lightweight. Weighing in at just under 10 pounds, this hedge trimmer provides ease of maneuverability, allowing users to comfortably trim hedges and shrubs for extended periods without causing undue fatigue. The engine’s efficient design allows for strong cutting power, enabling the trimmer to slice through even the densest foliage with ease.

Equipped with a 22-inch dual reciprocating blade, the Homelite HHC50LP ensures a smooth and precise cut. The dual-sided blades provide greater cutting versatility, allowing for both vertical and horizontal trimming. The blades are also engineered to be durable and resist wear and tear, resulting in a longer lifespan and consistent performance over time. This feature is particularly beneficial for homeowners who need to maintain their yard’s aesthetic without frequent tool replacements.

The HHC50LP also integrates advanced technologies aimed at enhancing user experience and safety. The automatic oiler feature ensures that the blades are always lubricated, which not only extends blade life but also reduces maintenance needs. Additionally, the ergonomic design of the handles allows for a comfortable grip, minimizing strain during prolonged use. Safety is prioritized with the inclusion of a two-handed safety switch, preventing accidental starts.

Another noteworthy feature is the trimmer's fuel-efficient design, which minimizes emissions and makes it an eco-friendly choice in the realm of garden tools. This efficiency means that users can complete their tasks without worrying excessively about fuel consumption or environmental impact.

In summary, the Homelite HHC50LP hedge trimmer combines power, ease of use, and safety in one compact package. With its strong engine, sharp dual reciprocating blades, and user-focused features, this hedge trimmer is an excellent investment for anyone looking to maintain a beautiful and well-groomed landscape. Whether it’s for routine trimming or tackling overgrown hedges, the HHC50LP is designed to deliver impressive results.