Homelite HHC50LP owner manual Installation Ventilation Operation, To Start Heater

Page 7

INSTALLATION

Continued

VENTILATION

OPERATION

4.Open propane supply valve on propane tank(s) slowly. Note: If not opened slowly, excess-flow check valve on propane tank will stop gas flow. If this happens, close propane supply valve and open again slowly.

5.Check all connections for leaks.

WARNING

Never use an open flame to check for a leak. Apply a mix- ture of liquid soap and water to all joints. Bubbles forming show a leak. Correct all leaks at once.

6. Close propane supply valve.

WARNING

Provide at least a 0.14 m2 (1.5-square-foot) opening of fresh, outside air while running heater. If proper fresh, outside air ventilation is not provided, carbon monoxide poisoning can occur. Provide proper fresh, outside air ventilation before running heater.

IMPORTANT: Provide extra fresh air if more heaters are being used.

WARNING

Review and understand the warnings in the Safety Informa- tion section, pages 2 and 3. They are needed to safely operate this heater. Follow all local codes when using this heater.

To Start Heater

1.Follow all installation, ventilation, and safety information.

2.Locate heater on stable and level surface. Make sure strong drafts do not blow into front or rear of heater.

3.Plug power cord of heater into a three-prong, grounded extension cord. Extension cord must be at least two meters (six feet) long, CSA listed, and of a proper size.

Extension Cord Wire Size Requirements

Up to 15 meters (50 feet) long, use 18 AWG rated cord.

15.5 to 30.5 meters (51 to 100 feet) long, use 16 AWG rated cord.

31 to 61 meters (101 to 200 feet) long, use 14 AWG rated cord.

4.Plug extension cord into a 120 volt/60 hertz, 3-hole, grounded outlet. Depress start switch for three seconds to start motor and fan. This will force air out front of heater.

Continued

7

101497

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Canadian Propane Construction Heater Contents Safety Information Safety Information Product Identification UnpackingOperation TheorySupply Regulator Position InstallationTo Start Heater Installation Ventilation OperationTo Restart Heater To Stop HeaterDisconnect heater from propane supply tanks Storage MaintenanceTROUBLE- Shooting Observed Fault Possible Cause RemedyMotor Service ProceduresMotor FanIgnitor Removing Ignitor Wire from Piezo IgnitorSpecifications 101497 101497 101497 Call Et à l’entretien Appareil DE Chauffage AU Propane Pour LA ConstructionPAR Mesure DE Sécurité Table DES MatièresAvertissements Suite Nomenclature DES PIÈ CES DÉ BallageNctionnement Principes DEEN Propane Avertissement Mise en marche de l’appareil Ventilation FonctionnementPour remettre l’appareil en marche Pour arrê ter l’appareil de chauffageDé brancher l’appareil du ou des ré servoirs de propane Remisage EntretienAnomalie Observé E Cause Probable Remè DE DÉ PannageAnomalie Observé E Cause Probable Moteur Procé Dure D’ENTRETIENDé pose ou fixation du ventilateur sur l’arbre du moteur Moteur suiteAllumeur VentilateurRetrait de la vis de montage et de l’allumeur Allumeur suiteSPÉ Cifications 101497 Composer LE

HHC50LP specifications

The Homelite HHC50LP is a versatile and robust hedge trimmer designed for homeowners and landscaping professionals alike. This reliable tool stands out due to its powerful performance, lightweight design, and user-friendly features, making it an excellent choice for tackling both small and large trimming jobs.

One of the standout characteristics of the HHC50LP is its powerful 2-cycle engine, which delivers exceptional cutting performance while ensuring that the unit remains lightweight. Weighing in at just under 10 pounds, this hedge trimmer provides ease of maneuverability, allowing users to comfortably trim hedges and shrubs for extended periods without causing undue fatigue. The engine’s efficient design allows for strong cutting power, enabling the trimmer to slice through even the densest foliage with ease.

Equipped with a 22-inch dual reciprocating blade, the Homelite HHC50LP ensures a smooth and precise cut. The dual-sided blades provide greater cutting versatility, allowing for both vertical and horizontal trimming. The blades are also engineered to be durable and resist wear and tear, resulting in a longer lifespan and consistent performance over time. This feature is particularly beneficial for homeowners who need to maintain their yard’s aesthetic without frequent tool replacements.

The HHC50LP also integrates advanced technologies aimed at enhancing user experience and safety. The automatic oiler feature ensures that the blades are always lubricated, which not only extends blade life but also reduces maintenance needs. Additionally, the ergonomic design of the handles allows for a comfortable grip, minimizing strain during prolonged use. Safety is prioritized with the inclusion of a two-handed safety switch, preventing accidental starts.

Another noteworthy feature is the trimmer's fuel-efficient design, which minimizes emissions and makes it an eco-friendly choice in the realm of garden tools. This efficiency means that users can complete their tasks without worrying excessively about fuel consumption or environmental impact.

In summary, the Homelite HHC50LP hedge trimmer combines power, ease of use, and safety in one compact package. With its strong engine, sharp dual reciprocating blades, and user-focused features, this hedge trimmer is an excellent investment for anyone looking to maintain a beautiful and well-groomed landscape. Whether it’s for routine trimming or tackling overgrown hedges, the HHC50LP is designed to deliver impressive results.
Top Page Image Contents