Samsung SSA-P102T user manual Cable Selection

Page 9

CABLE SELECTION

RS-232	RS-422/RS-232
	Converter
HOST PC
RS-422

	RS-422		RS-422


DC12V	DC12V
Power Supply	Power Supply

PRODUCT INTRODUCTION

	RF Reader	Lock/Alarm		RF Reader		Lock/Alarm
	Exit Button/Sensor Input			Exit Button/Sensor Input

	Item					Cable Type

1	DC 12V Product Power This		Belden #9409, 18 AWG		2	Conductor, Unshielded
	product
2	Reader (Power and Data) External		Belden #9512, 22 AWG		4	Conductor, Shielded


	Reader This product		Belden #9514, 22 AWG		8	Conductor, Shielded

	Door Contact Sensor		Belden #9512, 22 AWG		4	Conductor, Shielded
3	Exit Button
3	Exit Button
	Sensor Input		Belden #9514, 22 AWG		8	Conductor, Shielded
	Input This product		Belden #9514, 22 AWG		8	Conductor, Shielded
	Input This product

4	Door Lock
4	Alarm Device		Belden #9409, 18AWG		2 Conductor, Unshielded
	Lock (Alarm) This product
5	RS-232 Cable		Belden #9829, 24 AWG		2-twisted pair, Shielded
	Converter Host P.C.
	RS-485 Cable
	SSA-P102 SSA-P102		Belden #9829, 24 AWG		2-twisted pair, Shielded

6SSA-P102 Converter RS-422 Cable

SSA-P102	SSA-P102	Belden #9830, 24 AWG 3-twisted pair, Shielded
SSA-P102	Converter

J The cables should be thick enough to allow the maximum current consumed by the reader.

English _ 9

Image 9

Contents Please visit our website Access Control PanelSafety information Safety informationThis device may not cause harmful interference, Important Safety InstructionsContents Product introduction FeaturesHoliday Setup Door Open Alarm and Forced Door Open AlarmDuress Mode WHAT’S IncludedMain Board Power LED Displays the status of the power supply Buzzer control settingsInput #3 Input #2Cable Selection Termination Resistor Connecting the Termination Resistor and DiodeBypass Diode Connection Termination Resistor in RS-422 CommunicationHost PC EARTH-GROUNDING the Communication CablesPower Connection POWER, READER, and I/O ConnectionCheck the location of the power port Reader ConnectionInput Connection Output Connection Communication Line Connection RS-232 Pin Female ConnectorRS-232 Communication Port Connection Check the location of the communication portRS-422 Communication Port Connection Standalone RS-232CMAX m SSA-P102 RS-422 Communication Port Connection Multiple UnitsTCP/IP Communication Connection TCP/IP Communication Port ConnectionInitializing the system using the Initialize switch Reader Input BIT SetupUse the switch to set the value InitializationBoard ID Setting Communication Speed SetupUse the switch to set the value Troubleshooting TroubleshootingProblem Action Irrelevant card number is displayed Service for your helpProperly established D0, D1 System is in sync with the PCProduct speciﬁcations Product SpecificationsCorrect disposal of batteries in this product