2-8) PIP- KEY
Can be used to see the main screen while Single screen is displayed. The main screen can be changed and transfered to another channel while in PIP mode. Please refer to "CHAPTER 4. DISPLAY MODE setting
2-9) FREEZE- KEY
This key allows users to see a target camera picture in the PAUSE MODE.Select a camera with the ▲/▼ KEYs and press the FREEZE button. All other controls are disabled while in freeze mode.
2-10) SEQUENCE- KEY
Allows the monitor to display a full screen view of each camera in sequence.The time duration of each view is determined by the DWELL TIME. Refer to
2-11) ZOOM- KEY
It zooms a part of the picture in the display. If the ZOOM BUTTON is pressed, zoom area will be displayed. Users can move to a target area by using ▲/▼ KEY at this time. If œENTER√ SWITCH is pressed at the target area, the area will be displayed 2 times larger.
2-12) POWER- KEY
It turns the monitor and camera ON/OFF at the same time. When
the monitor power is ON, the monitor power LED is lit and the monitor displays a color bar pattern. Then, the OSD “SYSTEM INITIALIZING...” will be displayed with a blue pattern for about 13 seconds, then “SYSTEM STAND BY...” will be displayed for about 14 seconds.