Samsung SMO-211QN, SMO-150QN manual Display Menu function setting, Eng-38

If the time is set for each camera channel by using ▲/▼ KEY, each camera picture will be displayed for

the set time and switched to the next picture automatically.

3-4) DISPLAY MENU function setting

•Function: Allows users to select the color and ON/OFF of borderline at QUAD DISPLAY.

•Setting method: Move to #4. DISPLAY SETTING MENU by using▲/▼ KEY in the SETUP MENU, then press ENTER to display the OSD as shown in the below figure. (The figure shows the initial setting status.)

06/01/03		13:14:00
	DISPLAY SETTING
	BORDER	ON
	BORDER COLOR	GRAY
	PIP POSITION	B-RIGHT
	NETWORK STATUS	ON/OFF

Move to each item by using the ▲/▼ KEY, and using the œ / √ KEY to set the value.

1)BORDER item determines whether or not border line is displayed in the QUAD DISPLAY MODE. (ON: Displays the border line, OFF: Does not display the border)

2)BORDER COLOR item sets boarder line color among three colors: Black, White, Gray.

3)PIP POSITION item sets the location of sub picture at PIP DISPLAY. (T-LEFT: Upper part of left

side, T-RIGHT: Upper part of right side, B-LEFT: Lower part of left side, B-RIGHT: Lower part of right side)

4)NETWORK STATUS determines the [S] - Static (41page), [D] - DHCP (43page), [P] -PPPoE (46page) display at the left of top on the screen.

Refer to 3-7) NETWORK SETTING function and setting method (Eng-41) for the respective detailed status.

(ON: Displays the NETWORK STATUS, OFF: Does not display the NETWORK STATUS)

Eng-38