3-2) DATE/TIME MENU Function setting
•Function: Sets the display date format and current time.
•Setting method: Move to #2. DATE/TIME MENU by using ▲/▼ KEY at setup menu, then press the ENTER SWITCH to display the OSD as shown in the below figure below. (The figure shows the initial setting status.)
06/01/03 | 13:14:00 | |
| DATE/TIME SETTING |
|
| DATE TYPE | MM/DD/YY |
| DATE | 06 / 01 / 03 |
| TIME [HH:MM:SS] | 13 : 14 : 00 |
|
|
|
•Setting method of date display format
Move to the item by using ▲/▼ KEY, and press ENTER .
Select a format by using œ / √ KEY and then press the
Enter key to confirm your setting.
(“YY/MM/DD”, “MM/DD/YY”, “DD/MM/YY” are available for selectable data format.)
•Date and current time setting method
Repeat the above instruction for moving to each item (MONTH, DAY, YEAR, HOUR, MINUTE, SECOND) and entering the mode. Current date and time to display can be set. (It can be referred to when ALARM or VIDEO LOSS occurs.)
* Press the œ key to return to the previous Menu.
3-3) DWELL TIME MENU function setting
•Function: Displays each picture for
•Setting method: Move to #3. DWELL TIME menu by using ▲/▼ KEY at SETUP MENU, and press the ENTER SWITCH to display the following OSD as shown in the figure below. (The figure shows the initial setting status.)
06/01/03 | 13:14:00 | |
| DWELL TIME SETTING |
|
| CAM1 | 03 SEC |
| CAM2 | 03 SEC |
| CAM3 | 03 SEC |
| CAM4 | 03 SEC |
| CAM5 | 03 SEC |
| CAM6 | 03 SEC |
| CAM7 | 03 SEC |
| CAM8 | 03 SEC |
| 03 SEC | |
| 03 SEC | |
|
|
|