Image Projection (Continued)
Displaying an Enlarged Portion of an Image
Graphs, tables and other portions of projected images can be enlarged. This is helpful when providing more detailed explanations.
1
Press 
MAGNIFY on the remote control.
•Enlarges the image.
•Pressing 
or 
MAGNIFY enlarges or reduces the projected image.
Note
Press 
.
⋅1 ⋅2 ⋅3 ⋅4 ⋅9
Press 
.
•You can change the location of the en- larged image using P, R, O and Q.
2
Press RETURN on the remote con- trol to cancel the operation.
•To return to the default setting (×1), press RETURN when the
MAGNIFY buttons
IRIS 1, 2 buttons
Adjustment buttons (P/R/O/Q)
RETURN button
MENU HIDE button 
ECO+QUIET button
Switching the Iris Setting
This function controls the quantity of the projected light and the contrast of the image.
Press IRIS 1 or 2.
•Each time the button is pressed while the display is on, the mode changes in the following order:
■IRIS 1 High Brightness 
High Contrast
■IRIS 2 On
Off
Note
• For details, see page 37.
Note
•The selectable magnifications differ de- pending on the input signal.
•In the following cases, the image will return to the normal size (×1).
-When switching the INPUT mode.
-When RETURN has been pressed while the
-When the input signal is changed.
-When the input signal resolution and re- fresh rate (vertical frequency) change.
-When the Resize mode is changed.
-When the Picture mode is changed.
Hiding the Menu Temporarily (Menu Hide)
When the menu screen is displayed, you can tempo- rarily hide the menu screen by pressing and holding MENU HIDE on the remote control. This is useful when, for example, checking the video adjustment information.
Switching the Eco+Quiet Mode
Press ECO+QUIET to switch the Eco+Quiet mode between on and off.
•When the Eco+Quiet Mode is set to “On”, the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend.
Note
• Refer to “Eco+Quiet” on page 37 for details.
-28
