Sharp XV-Z15000 operation manual 4Setting the Demo Mode, 5Selecting the Transmission Speed RS-232C

Adjusting the Projector Function (“PRJ-ADJ” Menu) (Continued)

■Setting the Input Terminal Names (Input

Name)

Set the name of the input terminal (up to 14 alphanu- merical characters).

1 Press P/R to select “Input Name” and then press ENTER.

Picture		SIG-ADJ	SCR-ADJ	PRJ-ADJ
	Input name	HDMI1
	H D M I 1
	Reset
	Return

\ or button	Selects a character column.
▼ or 、 button	Selects a character.
ENTER button	Sets the input terminal name.

2 Press P/R to select “Return” and then press ENTER to return to the previous screen.

•To return to the previous setting, select “Reset” and then press ENTER.

Note

•When connecting the projector to a Sharp Video Product with an HDMI cable using an input mode of HDMI1 or HDMI2 and the linked func- tion with HDMI CEC (“One Touch Play” or “Sys- tem Standby”) works normally, the name of the connected Sharp Video Product is automatically captured.

•When the input terminal name has been changed by a user, the changed name is displayed.

•To return to the default name, select “Reset” and press ENTER.

4Setting the Demo Mode

Set the Demo Mode to “On” or “Off”.

Selectable items	Description
On	This enables Demo Mode.
Off	This disables Demo Mode.

Menu operation ⇒ Page 34

5Selecting the Transmission

Speed (RS-232C)

Make sure that both the projector and computer are set for the same baud rate.

Selectable items	Description
9600bps	Transmission speed is slow.
38400bps
115200bps	Transmission speed is rapid.

6Fan Mode Setting

This function changes the fan rotation speed.

Selectable items	Description
Normal	Suitable for normal environments.
High	Select this when using the projector at
	altitudes of approximately 4,900 feet
	(1,500 meters) or more.

•When “Fan Mode” is set to “High”, the fan rotation speeds up, and the fan noise becomes louder.

7Returning to the Default Settings

Use “All Reset” to initialize all the adjustments you have made to the default settings.

Note

The following items cannot be initialized.

•“SIG-ADJ” menu — Resolution

•“SCR-ADJ” menu — Language

•“PRJ-ADJ” menu — Lamp Timer (Life)

8Lamp Timer (Life)

You can confirm the cumulative lamp usage time and the remaining lamp life (percentage).

Lamp usage condition		Remaining lamp life
	“Life”	100%	5%
Operated exclusively with		Approx. 3,000	Approx. 150
“Eco+Quiet” set to “On”		hours	hours
Operated exclusively with		Approx. 2,000	Approx. 100
“Eco+Quiet” set to “Off”		hours	hours

Note

•It is recommended that the lamp be changed when the remaining lamp life becomes 5%.

•The lamp life may vary depending on the us- age condition.

-46