Sharp XV-Z15000 Adjusting the Projected Image “SCR-ADJ” Menu, 1Setting the Resize Mode

Adjusting the Projected Image (“SCR-ADJ” Menu)

The illustration shown here is for explanation and may be different from the actual on-screen display.

Picture SIG-ADJ SCR-ADJ PRJ-ADJ

Menu operation ⇒ Page 34

■V-Image Shift

Selectable items	\ button	button
V-Image Shift	Downward	Upward

Resize H-Image Shift

V-Image Shift

Overscan

Auto V-Keystone

Keystone Mode

H-Keystone

V-Keystone

Sphere

Rotation

OSD Display

OSD Brightness

Background

Menu Position

PRJ Mode

Language

Normal

0 0

On

Keystone

0 0 0 0

On

Standard

Logo

Upper Left

Front

English

\ button button

SEL./ADJ.	ENTER
RETURN	END

1Setting the Resize Mode

Note

•For details of the Resize mode, see page 29.

•You can also press RESIZE on the remote control to set the resize mode. (See page 29.)

2Adjusting the Image Position

You can move the projected image horizontally or verti- cally.

■H-Image Shift

Selectable items	\ button	button
H-Image Shift	Leftward	Rightward

\ button button

Note

•Depending on the Resize mode, Picture mode or the input signal resolution, the range of the image shift may be limited.

3Adjusting the Overscan

This function allows you to adjust the Overscan area (display area).

Selectable items	Description
On	The input area is displayed without screen
	edges.
Off	The whole input area is displayed.

Note

•You can adjust the Overscan area for the fol- lowing input signals and the RESIZE function.

-Input signal: 480I/480P, 540P, 576I/576P, 720P, 1035I or 1080I/1080P

-RESIZE function:“NORMAL”, “STRETCH”, “CINEMA ZOOM” or “ZOOM 14:9”

•If the display area ratio is set too large, noise may appear at the screen edges. If this hap- pens, set the display area ratio to a smaller value.

•Also read “About Copyrights” on page 30.

-42