Sharp XV-Z15000 Adjusting the Projector Function “PRJ-ADJ” Menu, 1Setting Auto Power Off Mode

Adjusting the Projector Function (“PRJ-ADJ” Menu)

The illustration shown here is for explanation and may be different from the actual on-screen display.

Menu operation ⇒ Page 34

3Setting One Touch Play, System

Standby and Input Name

Picture SIG-ADJ

Auto Power Off

Economy Mode

One Touch Play

System Standby

Input Name

Demo Mode

RS-232C

Fan Mode

All Reset

SCR-ADJ PRJ-ADJ

On

Off

Off

Off

Off

9600bps

Normal

When a Sharp product equipped with Consumer Elec- tronics Control (HDMI CEC) is connected to the projector with an HDMI cable, you can use the linked function with HDMI CEC (“One Touch Play” and “System Standby”).

Note

The CEC function may not work with some CEC devices. (When the projector is connected to a non- Sharp product, the CEC function may not work.)

Lamp Timer (Life)	X	h	XX	min ( XX% )
SEL./ADJ.			ENTER
RETURN			END

1Setting Auto Power Off Mode

This function automatically switches the projector to Standby mode if no signals are received for a set period.

Selectable items	Description
On	When no input signal is detected for
	more than 15 minutes, the projector
	will automatically enter standby mode.
Off	The Auto Power Off function will be
	disabled.

Note

•When the Auto Power Off function is set to “On”, 5 minutes before the projector enters standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.

2Setting the Power Save Mode (Economy Mode)

■Economy Mode

Selectable items	Description
On	This enables the Economy mode.
Off	You can use the linked functions. RS-
	232C can be used to control the pro-
	jector in standby mode.

Note

•Set this function to “Off” when you want to use RS-232C to control the projector from a computer.

•One Touch Play is set to “Off” when the Economy mode is set to “On”.

■Setting the One-Touch Playback Function

(One Touch Play)

One Touch Play turns on the projector and selects the input automatically when you turn on or begin playback on connected HDMI-compliant Sharp Video Products.

Selectable items	Description
On	This enables One Touch Play.
Off	This disables One Touch Play.

Note

•When enabling One Touch Play, be sure to enable the CEC setting on the HDMI-compliant Sharp Video Products connected to the projector.

•The Economy mode is set to “Off” when One Touch Play is set to “On”.

•In the following cases, One Touch Play is not enabled.

-When playback is paused

-When the screen is turned off (black) after the lens shutter is closed

-When the cooling fan is running (See page 48.)

-When the lamp is warming up (See page 48.)

■Setting the System Standby Function (System Standby)

When you turn off the projector, the HDMI-compliant video equipment connected to the projector enters standby mode.

Selectable items	Description
On	This enables System Standby.
Off	This disables System Standby.

Note

•When enabling System Standby, be sure to enable the CEC setting on the HDMI-compliant Sharp Video Products connected to the projector.

Useful Features

-45