Karcher 600 MP, 600 LP manual Fine Adjustment of the Operating Pressures

Page 8

Maintenance and Care

Version 06/05

WTC 600 LP / MP

 

 

 

•Before screwing on the filter bowl, check the sealing ring (39) for damage.

•Screw on the filter bowl and tighten with the fil- ter wrench.

•Open the untreated water supply again and start the system with the main switch.

3.2.5Fine Adjustment of the Operating Pressures

In case of alterations to the system adjustments, the following values must not be exceeded under any circum- stances:

•Pump pressure, max. 21 bar (MP) or 14 bar (LP)

•Drinking water amount, max. 650 l/h

•The concentrate amount must not ex- ceed the operational start-up value

The system reacts somewhat time- i delayed to alterations of the regulation

valves. Therefore carry out the adjust- ment at the pressure control valve (14) and at the concentrate control valve

(13)only in small steps, and wait until checking the respective effect.

(1)Flow of drinking water has decreased from _____ to _____ l/h

Read off the amount of drinking water at the flow meter (42) and compare with the value taken when starting operation (see operational start-up record).

If the flow of drinking water has de- creased to _____ l/h , the following fine

adjustment is to be carried out.

If the fine adjustment does not lead to an increase in the drinking water flow, the Kärcher Service must be con- tacted.

•Slowly shut the pressure control valve (14) in clockwise direction until the desired amount is almost reached at the flow meter (42).

•Slowly shut the concentrate control valve (13) in clockwise direction until the respective set value is reached on both flow meters for con- centrate (43) and drinking water (42).

Notice: The quantity of concentrate will in- crease. This is correct.

•Carry out a readjustment on both valve levers, if required.

 

10

 

42

11

43

 

13

 

12

 

14

(2)Conducting capacity of the drinking water has increased from _____

to _____ µS/cm

Small increases of the drinking water i conducting capacity do not influence

the drinking water quality.

On the display of the control panel (10), read the current drinking water conductance value and compare with the value taken when starting oper- ation (see operational start-up record).

If the drinking water conductance value has increased to _____ µS/cm, the follow-

ing fine adjustment is to be carried out. If the fine adjustment does not lead to a decrease of the drinking water con- ductance value, the Kärcher Service must be contacted.

•Open the concentrate control valve (13) in coun- terclockwise direction in small steps until the con- ductance capacity has reached the set value.

•Shut the pressure control valve (14) in clock- wise direction in small steps until the drinking water amount in the viewing glass (42) has reached the set value.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Waterclean 600 LP / MP WTC 600 LP / MP Safety Notes ContentsIntended Use Equipment ComponentsMaintenance and Care Maintenance and CareStarting Operation Filling the Metering StationsSwitching On the Equipment Operating IndicatorsSand and Activated Carbon Filter During OperationControl and Corrective Action Intervals Bleeding the Metering Pump Replacing the Fine FilterFine Adjustment of the Operating Pressures Flow of drinking water has decreased from to l/hMixing the Chemicals Metering TableSwitching Off the Equipment Consumption MaterialsConsumption Materials Metered AdditionMalfunctions MalfunctionsTechnical Data Technical DataVersion 06/05WTC 600 LP / MPEU Declaration of Conformity EU Declaration of Conformity

600 MP, 600 LP specifications

The Kärcher 600 LP and 600 MP are highly advanced mobile pressure cleaners designed to meet the diverse demands of both professional and industrial applications. Known for their robust engineering and innovative features, these machines are tailored for optimal performance and efficiency in a variety of settings.

The Kärcher 600 LP is engineered for low-pressure applications, making it particularly suitable for delicate surfaces and cleaning tasks where a gentle touch is essential. Its ergonomic design enhances maneuverability, allowing users to easily navigate through tight spaces while achieving thorough and effective cleaning. The unit is equipped with a reliable motor that delivers consistent performance, ensuring that operators can complete their tasks quickly and efficiently.

In contrast, the Kärcher 600 MP is built for high-pressure cleaning tasks, making it ideal for removing stubborn dirt and grime from more robust surfaces. This model features a powerful pump that generates a high flow rate and pressure, allowing users to tackle tough cleaning challenges with ease. With its durable construction and weather-resistant components, the 600 MP is perfect for both indoor and outdoor use, providing versatility across various applications.

Both models are equipped with state-of-the-art technologies that enhance their functionality. Kärcher's innovative Eco mode feature optimizes water usage, ensuring that cleaning tasks are achieved while minimizing environmental impact. The automatic pressure adjustment facilitates seamless transitions between different cleaning tasks, allowing users to switch from high pressure to low pressure without the need for manual adjustments.

Another key highlight of the Kärcher 600 series is the advanced filtration system which effectively traps debris and contaminants, ensuring that the pump operates smoothly and efficiently over extended periods. The user-friendly control panel allows operators to easily monitor essential parameters such as water temperature, pressure, and remaining run time, promoting efficient operation and reducing downtime.

In terms of mobility, both the 600 LP and 600 MP are equipped with sturdy wheels and handles, making them easy to transport across job sites. Furthermore, their compact design allows for convenient storage, an essential feature for professionals working in environments with limited space.

Overall, the Kärcher 600 LP and 600 MP stand out for their reliability, performance, and versatility. With their advanced technological features and rugged construction, they provide unparalleled cleaning solutions in demanding industrial and professional environments. Whether facing light dirt or deep-seated grime, these pressure cleaners deliver exceptional results and value for users seeking efficiency and effectiveness.
Top Page Image Contents