English | BR VS 400 *USA |
5
OPERATING DESCRIPTION OF
THE FLOOR CLEANER
*The BR VS 400 has two rotary brooms rotating contrary to each other (1)
*The cleaner can be moved forwards and backwards when in use
*Work is carried out in a lateral direction (large surface area cleaned) or in lanes
*Dirt is removed by the roller brushes and cleaning agent (2)
*Removed dirt must be cleaned up by a dry/wet vacuum cleaner
*Special rotary brushes (accessory) are used for polishing the floor covering
DEVICE ELEMENTS
1.Unlocking thrust clip
2.Water
3.Recessed grip
4.Castors
5.Splash guard (vertically adjustable)
6.Tank fill opening
7.Sliding
1.Clip for water pump
2.Clip for brush motor
3.Power cable
4.Strain relief
5.Tank
6.Releasing brushes
7.Support stirrup
8.Brushes
9.Hinge
10.Turning handle for hinged clip
FIRST INSTALLATION
Installing the pushing handle
Position the lower half of the pushing handle vertically
Adjust the upper half of the pushing handle and fix it with the knurled screw
Note:
Do not jam cable when fitting
Install rotary brushes
–Carefully lay the cleaner down
–Always use two rotary brushes of the same type
Place the rotary brush with gearing onto the drive
–Press the rotary brush down and place it into the thrust bearing
–Install the second rotary brush as described
–Check that the rotary brushes are in the correct position
–Position the cleaner vertically