GE 45129 To set the system in Home mode, To set system in Away mode, Disarming the System

Page 12

Arm (HOME) – No delay, instant alarm.

This setting is used when you wish to secure the area but will be home and moving around within the armed area. In the Arm/HOME setting, any Motion Sensors in Zone 1, 2, and 3 will not operate. All Sensors must be closed/not activated in order to set the alarm.

To set the system in HOME mode

HOME Mode

To set the Alarm in Home Mode

Step 1

Enter four digit Security Code

until system is disarmed. In the Arm/AWAY setting, all Sensors in Zones 1, 2, and 3 will trigger the Alarm System. All Sensors must be closed/not activated in order to set alarm.

To set system in AWAY mode

Step 1 - Enter your four digit Security Code.

Step 2 - Press the Arm button two times. The red alarm LED indicator will flash continuously.

AWAY Mode

 

Input DC 12V

 

-

+

 

 

Mute

 

 

Learn

1

2 3 4 Arm

Alert

 

 

Chime

1 2 3 4

Armed Power

Off

 

Zone

Only Zones 1, 2, and 3

Step 2

Press and HOLD “Arm ” button for two seconds

Note: Motion Sensors do not operate in HOME Mode.

The Armed LED indicator turns on

Step 3

To disarm, enter the four digit Security Code

 

Input DC 12V

 

-

+

 

 

Mute

 

 

Learn

1

2 3 4 Arm

Alert

 

 

Chime

1 2 3 4

Armed Power

Off

 

Zone

To set the Alarm in Away Mode

Step 1

Enter four digit Security Code

Step 2

Press “Arm ” button twice

The Armed LED indicator begins flashing

(45 seconds to exit)

Step 3

To disarm, enter the four digit Security Code

30 seconds to enter)

Step 1 - Enter your four digit Security Code.

Only Zones 1, 2, and 3

Step 2 - Press/hold the Arm button

for two seconds. The red Arm LED indicator will turn on. The system is now Armed.

Arm (AWAY) – Delayed alarm for entry/exit.

After the system is armed a 45 second delay begins. This is to allow time to leave the protected area before system is active. The Control Center will begin beeping and the Armed LED indicator will begin to flash. During the last 10 seconds the beeping will speed up indicating the alarm will arm shortly. Once the alarm has become active, the red LED indicator will continue to flash

12

Note: If a Sensor is triggered in Zone 4 it will not activate the alarm. It will sound an alert tone only. (See Zone 4 page 9)’.

Disarming the System

When you return to the protected area the unit will trigger and give you 30 seconds to disarm the system. To disarm the system at any time, enter the four digit Security Code. Entering the four digit Security Code will disarm the system during the 30 second delay entry period, or even if the alarm has been triggered and the siren is sounding.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Control Center Table of Contents Important safeguards PrecautionsThis system will help alleviate those concerns Zone Indicators Features Battery Back-up Control CenterKeypad Operations Low Battery Indicator Sensors Choice Alert System operates in three different modesAll Sensors in the Zone Notification switch settings Mode 3 Armed/Alarm Mode Zones 1,2,3Wireless performance Quick Reference CardLets get started Creating a Personal Security CodeStep Press and hold the Learn button unit will beep Sensors and ZonesTo the battery Here are Some examples of possible Sensor/Zone combinationsAssigning a Sensor to a Zone Only one Sensor can be assigned at a timeTesting a Sensor or your system Release the Zone button Activate the SensorErasing a Sensor from a Zone Release all buttonsTo set the system in Home mode To set system in Away modeDisarming the System Accessories Silent Alert, Alarm Siren Signal Repeater Bypass a Zone For all Zones and ModesAdding a Silent Alert Alarm Siren Adding a Alarm SirenTest the Alarm Siren Adding a Signal RepeaterPage Choice Alert Control Center F.A.Q.’S See pg.11 in manualIs reset beeping will start again when Sensor/door is opened FCC Warning Page Battery Warning Risk of personal injury

45129 specifications

The GE 45129 is an advanced locomotive model developed by General Electric, designed for efficient and versatile freight transport. Among its main features, the GE 45129 boasts a powerful engine that provides high levels of tractive effort, making it suitable for hauling heavy freight loads across various terrains. This model is specifically engineered to navigate both urban and rural rail networks, ensuring reliability in different operational environments.

One of the standout technologies incorporated into the GE 45129 is its state-of-the-art diesel-electric propulsion system. This system uses a diesel generator to produce electricity, which then powers electric traction motors on the locomotive's wheels. This configuration enhances fuel efficiency compared to traditional diesel drives, as it allows for better energy management and reduced emissions. Furthermore, the locomotive is equipped with advanced data analytics and monitoring systems that continuously assess performance metrics, helping operators optimize their use and maintenance schedules.

The GE 45129 features a robust and durable construction, designed to withstand the rigors of freight transportation. It includes high-quality materials that enhance its durability and longevity, ensuring that it remains operational even in challenging conditions. The locomotive's streamlined design not only improves its aerodynamics, leading to better fuel efficiency but also minimizes wear and tear on tracks.

In terms of safety and control, the GE 45129 includes sophisticated braking systems and technologies that provide efficient stopping power, increasing safety margins when transporting cargo. It also contains advanced signaling and communication systems that keep the train connected to central control units, allowing for real-time updates on operational status.

Additionally, this locomotive model is designed with operator comfort in mind. The cab interior is ergonomically designed, minimizing fatigue during long hauls while incorporating technology for easy navigation and monitoring of systems. This focus on user experience ensures that train operators can maintain high levels of performance and safety throughout their journeys.

Overall, the GE 45129 represents a significant advancement in locomotive technology, making it a vital asset for freight companies seeking reliability, efficiency, and safety in their operations.
Top Page Image Contents