GE 45129 user manual Test the Silent Alert, Adding a Alarm Siren, Test the Alarm Siren

Page 14

Test the Silent Alert

Step 1 - After the Silent Alert has been successfully linked with the Control Center, press and hold the Mute button on the Control Center for three seconds. This action sends a test signal.

Step 2 - When the Silent Alert receives the test signal from the Control Center, one LED indicator on the Silent Alert will begin to flash once a second. It will continue to flash for 30 seconds.

Alarm Siren

The Alarm Siren will increase your system’s sound. Use in areas where Control Center Siren cannot be heard.

Adding a Alarm Siren

Step 1 - Remove cover

Low Batt On Armed

 

 

 

 

 

 

on top of the Alarm

 

 

 

 

 

 

Siren. Plug in the AC

 

 

 

 

 

 

adapter. Insert the

 

 

 

 

 

 

antenna and slide

 

 

 

 

 

 

mode switch to the

 

 

 

 

 

 

‘ON’ position.

 

 

 

 

 

 

Step 2 - Press and hold

 

ON/OFF

LEARN

 

 

 

 

 

 

the Learn button inside

 

 

 

 

 

 

 

 

 

 

 

 

the Alarm Siren. The ‘ON’ indicator on the front will begin to flash and it will sound three beeps.

Step 3 - While continuing to press the Learn button, press and hold the Mute button on the side of the Control Center for three seconds. The Control Center will send a test signal to the Alarm Siren.

When the Alarm Siren receives the test signal it will sound a long tone and the ‘ON’ indicator will stop

flashing. This indicates the Alarm Siren has been linked with the Control Center. Replace cover to Alarm Siren.

Test the Alarm Siren

Step 1 - After the Alarm Siren has been successfully linked with the Control Center press and hold the Mute button on the Control Center for three seconds.

Step 2 - When the Alarm Siren receives the test signal from the Control Center, one LED indicator on the Alarm Siren will begin to flash. It will continue to flash for 30 seconds. This indicates it has received the test signal.

The Signal Repeater will

Signal

extend the range of the

Repeater

 

 

 

Choice Alert system up to

 

 

 

150 feet from its location

 

 

 

– Effectively repeating the

 

 

 

 

Test

signal from any Sensor

 

 

 

back to the Control Center should a Sensor be located

out of range. The Signal Repeater does not send or receive signals to the Silent Alert or Alarm Siren.

Adding a Signal Repeater

Step 1 - Find an electric outlet near the Sensor having trouble communicating with the Control Center. Make certain the location is between the Sensor and Control Center. Plug the Signal Repeater into the outlet and press the ‘Test’ button on the side of Signal Repeater. It will send a test signal out to the Control Center and the LED indicator on the Signal Repeater will flash rapidly for about one

14second, then go out.

Image 14
Contents Control Center Table of Contents Important safeguards PrecautionsThis system will help alleviate those concerns Keypad Operations Zone IndicatorsFeatures Battery Back-up Control Center All Sensors in the Zone Low Battery Indicator SensorsChoice Alert System operates in three different modes Notification switch settings Mode 3 Armed/Alarm Mode Zones 1,2,3Lets get started Wireless performanceQuick Reference Card Creating a Personal Security CodeStep Press and hold the Learn button unit will beep Sensors and ZonesAssigning a Sensor to a Zone To the batteryHere are Some examples of possible Sensor/Zone combinations Only one Sensor can be assigned at a timeErasing a Sensor from a Zone Testing a Sensor or your systemRelease the Zone button Activate the Sensor Release all buttonsDisarming the System To set the system in Home modeTo set system in Away mode Adding a Silent Alert Accessories Silent Alert, Alarm Siren Signal RepeaterBypass a Zone For all Zones and Modes Test the Alarm Siren Alarm SirenAdding a Alarm Siren Adding a Signal RepeaterPage Choice Alert Control Center F.A.Q.’S See pg.11 in manualIs reset beeping will start again when Sensor/door is opened FCC Warning Page Battery Warning Risk of personal injury

45129 specifications

The GE 45129 is an advanced locomotive model developed by General Electric, designed for efficient and versatile freight transport. Among its main features, the GE 45129 boasts a powerful engine that provides high levels of tractive effort, making it suitable for hauling heavy freight loads across various terrains. This model is specifically engineered to navigate both urban and rural rail networks, ensuring reliability in different operational environments.

One of the standout technologies incorporated into the GE 45129 is its state-of-the-art diesel-electric propulsion system. This system uses a diesel generator to produce electricity, which then powers electric traction motors on the locomotive's wheels. This configuration enhances fuel efficiency compared to traditional diesel drives, as it allows for better energy management and reduced emissions. Furthermore, the locomotive is equipped with advanced data analytics and monitoring systems that continuously assess performance metrics, helping operators optimize their use and maintenance schedules.

The GE 45129 features a robust and durable construction, designed to withstand the rigors of freight transportation. It includes high-quality materials that enhance its durability and longevity, ensuring that it remains operational even in challenging conditions. The locomotive's streamlined design not only improves its aerodynamics, leading to better fuel efficiency but also minimizes wear and tear on tracks.

In terms of safety and control, the GE 45129 includes sophisticated braking systems and technologies that provide efficient stopping power, increasing safety margins when transporting cargo. It also contains advanced signaling and communication systems that keep the train connected to central control units, allowing for real-time updates on operational status.

Additionally, this locomotive model is designed with operator comfort in mind. The cab interior is ergonomically designed, minimizing fatigue during long hauls while incorporating technology for easy navigation and monitoring of systems. This focus on user experience ensures that train operators can maintain high levels of performance and safety throughout their journeys.

Overall, the GE 45129 represents a significant advancement in locomotive technology, making it a vital asset for freight companies seeking reliability, efficiency, and safety in their operations.