GE 45129 user manual Bypass a Zone For all Zones and Modes, Adding a Silent Alert

Page 13

Bypass a Zone (For all Zones and Modes)

There may be occasions when you would like to temporarily prevent the Sensors in a Zone from triggering the alarm. In this situation you can bypass a Zone when setting the alarm. Once the alarm is disarmed the Bypass setting will be removed.

Step 1 - Select the Zone to bypass. Before arming the system, press and hold the Zone button for three seconds. The Control Center will sound a long tone while the button is pressed. After three seconds the tone will stop and the Zone LED indicator will turn on.

The Zone has been set to bypass Note: Sensors in a bypassed Zone will not trigger the Alarm, Alert or Chime functions.

Step 2 - Arm system (HOME or AWAY).

Step 3 - The Bypass setting can be removed by pressing and holding the Zone button again for three seconds or by disarming the system.

ACCESSORIES - Silent Alert, Alarm Siren,

and Signal Repeater

Silent Alert

The Silent Alert is designed to provide a visual warning BEFORE entering the home if an alarm has been triggered.

You can add any number of Silent Alert LED indicators to the Choice Alert System. To add a Silent Alert to the system, you will need to link it with the Control Center.

Adding a Silent Alert™

Step 1 - Open the Silent Alert by gently inserting a small blade screwdriver

into the tab slot on one end and gently pry upwards. This action releases the cover from the base. This procedure can be easily completed once the Silent Alert is mounted as well. Install two (2) new “AA” batteries according to the polarity markings in the battery compartment.

Step 2 - Press and hold the Learn button inside the Silent Alert. One of the LED indicators on the front of the Silent Alert will begin to flash.

Step 3 - While continuing to press the Learn button in the Silent Alert, press and hold the Mute button on the side of the Control Center for three seconds. The Control Center will sound two beeps and flash the green power indicator, a test signal to the Silent Alert. When the Silent Alert receives the test Signal’, the LED indicator will stop flashing, indicating it has been linked with your Control Center. Reattach the Silent Alert to the base.

Anytime the alarm is triggered (in Armed HOME or AWAY), the siren sounds, and the Control Center will send a signal to the Silent Alert to begin alternately flashing its LED indicators. The Silent Alert will continue to flash the LED indicators until the Control Center sends a disarm signal.

Note: Even if the Control Center is disconnected from power or destroyed, the Silent Alert will continue to flash LED indicators.

13

Image 13
Contents Control Center Table of Contents Precautions Important safeguardsThis system will help alleviate those concerns Features Battery Back-up Control Center Zone IndicatorsKeypad Operations Choice Alert System operates in three different modes Low Battery Indicator SensorsAll Sensors in the Zone Mode 3 Armed/Alarm Mode Zones 1,2,3 Notification switch settingsQuick Reference Card Wireless performanceLets get started Creating a Personal Security CodeSensors and Zones Step Press and hold the Learn button unit will beepHere are Some examples of possible Sensor/Zone combinations To the batteryAssigning a Sensor to a Zone Only one Sensor can be assigned at a timeRelease the Zone button Activate the Sensor Testing a Sensor or your systemErasing a Sensor from a Zone Release all buttonsTo set system in Away mode To set the system in Home modeDisarming the System Bypass a Zone For all Zones and Modes Accessories Silent Alert, Alarm Siren Signal RepeaterAdding a Silent Alert Adding a Alarm Siren Alarm SirenTest the Alarm Siren Adding a Signal RepeaterPage See pg.11 in manual Choice Alert Control Center F.A.Q.’SIs reset beeping will start again when Sensor/door is opened FCC Warning Page Risk of personal injury Battery Warning

45129 specifications

The GE 45129 is an advanced locomotive model developed by General Electric, designed for efficient and versatile freight transport. Among its main features, the GE 45129 boasts a powerful engine that provides high levels of tractive effort, making it suitable for hauling heavy freight loads across various terrains. This model is specifically engineered to navigate both urban and rural rail networks, ensuring reliability in different operational environments.

One of the standout technologies incorporated into the GE 45129 is its state-of-the-art diesel-electric propulsion system. This system uses a diesel generator to produce electricity, which then powers electric traction motors on the locomotive's wheels. This configuration enhances fuel efficiency compared to traditional diesel drives, as it allows for better energy management and reduced emissions. Furthermore, the locomotive is equipped with advanced data analytics and monitoring systems that continuously assess performance metrics, helping operators optimize their use and maintenance schedules.

The GE 45129 features a robust and durable construction, designed to withstand the rigors of freight transportation. It includes high-quality materials that enhance its durability and longevity, ensuring that it remains operational even in challenging conditions. The locomotive's streamlined design not only improves its aerodynamics, leading to better fuel efficiency but also minimizes wear and tear on tracks.

In terms of safety and control, the GE 45129 includes sophisticated braking systems and technologies that provide efficient stopping power, increasing safety margins when transporting cargo. It also contains advanced signaling and communication systems that keep the train connected to central control units, allowing for real-time updates on operational status.

Additionally, this locomotive model is designed with operator comfort in mind. The cab interior is ergonomically designed, minimizing fatigue during long hauls while incorporating technology for easy navigation and monitoring of systems. This focus on user experience ensures that train operators can maintain high levels of performance and safety throughout their journeys.

Overall, the GE 45129 represents a significant advancement in locomotive technology, making it a vital asset for freight companies seeking reliability, efficiency, and safety in their operations.