GE 45227-1 manual Choose Flicker Option, Format Memory Card, Live mode

4.Use  to move to LCD Brightness. Press OK to enter

5.Use  to reduce the brightness value

or  to increase it

6.Press OK to confirm the selected quality and go back to the previous menu. Press menu to return to live mode.

7.Note: You can press the MENU button anytime during setting to cancel the selection and go back to the previous menu

Choose Flicker Option

Adjust LCD

Brightness

0.0

-2.0 0 2.0

This setting is for 50Hz/60Hz lighting. E.g. US: 60Hz

EU: 50Hz

HK: 50Hz

50Hz Flicker 60Hz Flicker

Flic k er

50H z Light

1.Press MENU buttons to enter Menu mode

2.Use to move to Setup

3.Press OK to enter the setting mode

4.Use  to move to Flicker option. Press OK to enter

5.Use  to select 50Hz or 60Hz depending on your country standards - see above.

6.Press OK to proceed the selection and go back to previous menu

7.Press MENU during setting to cancel the selection and go back to the last menu

Format Memory Card

1.Press MENU to enter Menu mode

2.Use  to move to Setup

3.Press OK to enter the setting mode

4.Use  to move to Format. Press OK to enter

5.Use to select Cancel or OK. Press OK

to confirm the selected command

6.Press OK to confirm the selected quality and go back to the previous menu. Press menu to return to

live mode. 25

F or m at will era se

A ll data

Cancel O k