GE 45227-1 Choose Auto Off, Enable/Disable Auto Delete, Enable Auto Delete Disable Auto Delete

6.Press OK to confirm the selected quality and go back to the previous menu. Press menu to return to live mode.

7.Note: You can press the MENU button anytime during setting to cancel the selection and go back to the previous menu

Choose Auto Off

5 seconds

10 seconds

To conserve power, the IntelliCorder will automatically go to stand-by mode whenever it detects no motion in RECORD or LIVE mode, or remains idle in PLAY mode.

1.Set MODE switch to LIVE while the LCD is ON

2.Press MENU button to enter Menu mode

3.Use  to move to Setup

4.Press OK to enter the setting mode

5. Use to select 5 seconds or 10 seconds

6.Press OK to confirm the selected quality and go back to the previous menu. Press menu to return to live mode.

7.Note: You can press the MENU button anytime during setting to cancel the selection and go back to the previous menu

Enable/Disable Auto Delete

Auto Delete means that the three oldest index files are deleted when memory is full

Enable Auto Delete

Disable Auto Delete

22