GE 45227-1 manual Contact customer service for any questions. Call

Page 5

you feel the IntelliCorder may not be performing correctly, contact customer service for assistance.

3.Motion Detection – The PIR motion sensor will NOT detect motion through glass storm doors, screen doors or metal gates.

4.Camera faceplate care – Do not clean the lens with strong or abrasive detergents. Use lens tissue or a cotton tipped applicator and ethanol alcohol.

5.Light Source – The Cameras viewing area must be illuminated with a suitable light source during evening and nighttime hours.

6.Door Mounting – The product should be mounted to a door, only as recommended by the instructions. Contact customer service for any questions.

7.Stand-by MODE - When not using your IntelliCorder set mode switch to Play and Press Power. This will power off IntelliCorder.

8.Do not touch the LCD screen with a sharp-pointed object.

9.If your IntelliCorder is used in a cold environment, a residual image may appear on the LCD screen. This is not a malfunction.

Contact customer service for any questions. Call 1-800-654-8483

Image 5

Contents 45227-1 07/17/06 IntelliCorder Camera System User’s GuideCongratulations Support IntelliCorder Mounting Bracket Adjustment ToolBattery Charger Rechargeable Things You Should Know FCC Warning Contact customer service for any questions. Call Terminal Clock Battery Cover SD Card Insert Slot Battery Cover MicrophoneLCD Screen 1.5 Ltps LCD LensPreparation Install Battery Battery is normally warm after charging or just after use Press Orange Battery ReleaseNever attempt to disassemble or reassemble Battery Charge only with specified charger and AC adapterTo avoid Battery damage Choose a Mounting Location InstallationPage Operation See page 22 for settingSD Card Insertion/Removal SD Card not includedFine LP Long PlayBefore you begin Motion-Activation in Record ModeOperating Modes Fine Motion-Activation in Live mode settingTo standby mode when no motion is Set Mode switch to LiveScreen during playback When in live mode, press to Full indicator Red light willFile Order depends on DCF Index CLIP00001 to CLIP09999 Playback status Battery Status Using Menu ModeMovie Quality RECORD/ Live Mode Menu ScreenExposure Valve Setup Adjust White BalanceChoose Auto Off Enable/Disable Auto DeleteEnable Auto Delete Disable Auto Delete Erase All Play Mode Menu ScreenErase This Setup Screen Adjust VolumeDuring setting to cancel Choose LCD BrightnessFormat Memory Card Live modeChoose Flicker Option To SD card Copy Files to SD CardSet Date / Time Date TimeChoose Language Default SetupUse SD Memory Card Firmware VersionOn the monitor Software Requirements Trouble ShootingDownload Video Check Battery Indicator Replace with a new BatteryIndicator appears, use another SD card Be rechargedVideo Recording Camera CMOS, Approx ,000 pixels Input Power Charger 100-240V AC, 50/60Hz BatteryInch Color S/D Lpts 557 x File Type