Call Information

Service Charges

This function is SIM dependent. To maintain control over the cost of calls that are made, the phone can be set to restrict use to a finite number of units overall.

Setting the Unit Price

Firstly, a price per unit must be entered. This is the cost that the Service Provider charges for one unit of call time.

1From Idle mode press B 622 to enter the Price/Unit menu

2Press B to edit the values

At this point you must enter your PIN2 or lock code to continue.

3Enter a currency unit (up to three characters) and press B

4Enter a price and press B

Setting the Maximum Unit Level

1From Idle mode press B 623 to enter the Max Cost menu

2Press B to edit the values

At this point you must enter your PIN2 or Lock Code to continue.

3Enter a value (number of units) which is to be the maximum permitted, and the corresponding cost is displayed

4Press B to accept

Note: The duration of one unit may vary during the day, peak and off-peak times. Therefore, the call charge can be calculated accordingly. Call charge information may not give an accurate reflection of the tariffs charged by your Service Provider.

31

Page 35
Image 35
Panasonic EB-GD35 operating instructions Service Charges, Setting the Unit Price, Setting the Maximum Unit Level