Applications

Setting the Alarm

If you have not already set the clock, you are prompted to do so prior to setting the alarm.

1From Idle mode press B 433 to enter the Alarm Set menu

2Enter the digits for the time using 24 hour clock and press B

3Use e to select the frequency of the alarm and press B

When the phone is in Idle mode and the clock display has been enabled, ? is displayed next to the clock display, to indicate the alarm is set.

Caution: Ensure that the setting of the alarm does not contravene any regulations whereby it may automatically power on when in an aircraft or medical facility etc - see “Important Information” page 50.

Muting the Alarm

When the set time is reached the alarm sounds and the display flashes an alarm message. The alarm sounds for 30 seconds. If the alarm is due during a call, it activates vibration alert.

To end the alarm press any key

Disabling the Alarm

1From Idle mode press B 433 to enter the Alarm Set menu and press B

2Use e to select Disabled and press B

Once disabled, you can re-enable the alarm using the same procedure.

Adjusting the Alarm Time

1From Idle mode press B 433 to enter the Alarm Set

2Press and hold C to remove the current alarm time

3Enter the digits for the time and press B

4Use e to select the frequency of the alarm and press B

Note: Alarm alerts are dependent on tones/vibration settings.

21

Page 25
Image 25
Panasonic EB-GD35 operating instructions Setting the Alarm, Muting the Alarm