Cabletron Systems 2000 manual Creating and Editing an Advanced Alarm, Refresh button

Alarm Configuration

Note that the information provided in this screen is static once it is displayed; for updated information, click on the Refresh button. Adding or modifying an alarm automatically updates the list.

The Þelds in the Events Watch display include:

Index	This is a number that uniquely identiÞes an entry in the
	event table; an index number is assigned when an event
	is created. These numbers are extremely important, as
	they are the means by which an event is associated with
	an alarm or a packet capture Þlter. As with alarms, these
	index numbers are user-deÞned and can be assigned
	according to any indexing scheme that works for you.
	Index numbers are permanently assigned to their
	associated events; however, numbers made available by
	the deletion of existing events can be assigned to new
	events, as needed. Note that indices 2000 to 4999 are
	reserved and unavailable.
LastTime	Indicates the last time this event was triggered. Note that
	this information is static once it is displayed, and the
	LastTime Þeld will not be updated unless you close, then
	open, the Alarms/Events window, or click on the
	Refresh button.
Type	Indicates the type of response that will be generated if
	the event is triggered: log, trap, or log & trap. A type of
	ÒnoneÓ indicates that occurrences of the event will not be
	logged and no trap will be sent; however, note that this
	Þeld does not indicate whether or not there are any
	actions associated with the selected event.
Description	This is a user-deÞned text description used to identify
	the event and/or the alarm or packet capture that
	triggers it.

The Event Log button at the bottom of the screen provides access to the log which lists the occurrences of an event.

Note that the information provided in this screen is static once it is displayed; for updated information, click on the Refresh button. Adding or modifying an event automatically updates the list.

Creating and Editing an Advanced Alarm

The Create/Edit Alarms window (Figure 3-4, following page) allows you to both create new alarms and edit existing ones. When you click on the Create/Edit button in the Alarms Watch list, the Create/Edit Alarms window will display the parameters of the alarm which is currently highlighted in the list. (If no alarms have yet been conÞgured, a set of default parameters will be displayed.) All of

3-14 Advanced Alarm Configuration