Introduction

¥The 2H28-08RSmartSwitch, which has a total of eight ports consisting of six built-in front panel 100BaseFX multimode Þber SC ports and two front panel slots for optional Fast Ethernet Port Interface Modules (FEPIMs) to support an uplink to 100 Mbps Ethernet backbones or a high speed connection to a local server. The 2H28-08R supports dual, redundant power supplies.

¥The 2H253-25RSmartSwitch is a 10/100 Fast Ethernet switch, providing 24 100BaseTX ports via dual RJ21 connectors, and a VHSIM slot. The 2H253-25R also includes redundant internal power supplies.

¥The 2H258-17RSmartSwitch features 16 100BaseFX MMF (via MT-RJ connectors) ports, and a single VHSIM slot. The 2H258-17R also includes redundant internal power supplies.

¥The 2M46-04RSmartSwitch provides two front panel slots for optional Fast Ethernet Port Interface Modules (FEPIMs) to support an uplink to 100 Mbps Ethernet backbones or a high speed connection to a local server, and two slots for High Speed Interface Modules (HSIMs) which can provide FDDI, ATM, Gigabit Ethernet, or WAN connectivity depending on the type of HSIMs installed. The 2M46-04R supports dual, redundant power supplies.

Several Fast Ethernet Port Interface Modules (FEPIMs) are available for use with the various SmartSwitch 2000 models:

¥the FE-100FX, which provides one multi-mode Þber port via an SC connector;

¥the FE-100TX, with one Category 5 UTP RJ45 connector;

¥the FE-100F3, with one single-mode Þber port via an SC connector;

¥and the FE-100S1, S3, and S5, which provide one multi-mode Þber, single-mode Þber, or long reach single-mode Þber SONET/SDH port, all via SC connectors.

Two types of High Speed Interface Modules (HSIMs) are available for use with the various SmartSwitch 2000 models. Each HSIM provides frame translation between ATM, FDDI, WAN, Gigabit Ethernet, and Ethernet through an on-board Intel i960 processor:

¥The HSIM-F6is an FDDI/Ethernet Translator, which can act as a Single Attached Station (SAS) or Dual Attached Station (DAS) on an external FDDI ring. CabletronÕs FDDI Port Interface Modules (FPIMs) provide a wide range of media connectivity to the ring. The HSIM-F6 also has full-duplex capability, allowing for a 200 Mbps connection to another HSIM-F6.

¥The HSIM-A6DPis an Asynchronous Transfer Mode (ATM) HSIM, which provides an ATM uplink via two media-conÞgurable ATM Port Interface Modules (APIMs). The dual APIM design allows for a redundant connection to the uplink, so that if the primary interface fails, the secondary interface will automatically take over. The HSIM-A6DP acts as an ATM Forum LAN Emulation Client (LEC) so that it can transfer data between devices on an 802.X LAN supported by the SmartSwitch 2000 and ATM-connected end stations (or other 802.X end stations) across a high speed ATM Link. The HSIM-A6DP adheres to the ATM Forum-approved LAN Emulation (LANE)

1-3

Page 11
Image 11
Cabletron Systems 2000 manual Introduction

2000 specifications

Cabletron Systems was a prominent company in the networking and communications industry during the late 20th century, and by the year 2000, it had established itself as a leader in providing high-performance networking solutions. The company was known for its innovative approach to network architecture and its commitment to delivering reliable products that enabled seamless connectivity in various environments.

One of the primary features of Cabletron Systems in 2000 was its advanced networking technologies, including Local Area Network (LAN) and Wide Area Network (WAN) solutions. The company specialized in developing multi-layer switches that could efficiently manage traffic and deliver high-speed data transfer. Their products were particularly popular in enterprise settings, where network performance and reliability were paramount.

Cabletron's solutions included a range of products, from Ethernet switches to routers, which were designed with scalability and flexibility in mind. This allowed businesses to adapt their networks to accommodate growth, without the need for a complete overhaul of their infrastructure. The company’s Integrated Networking Architecture (INA) was a significant innovation during this period, enabling efficient communication and management of diverse network resources.

Another major characteristic of Cabletron Systems was its commitment to interoperability. The company’s products were designed to be compatible with several industry standards, ensuring that organizations could easily integrate Cabletron solutions into their existing networks. This focus on compatibility helped to foster collaboration among different devices and systems, further enhancing network efficiency.

Security was also a key feature of Cabletron’s offerings in 2000. With growing concerns about data breaches and unauthorized access, the company incorporated advanced security measures into its products. These features included robust authentication protocols, encryption options, and secure management interfaces, which helped safeguard sensitive data during transmission.

Customer support and service were paramount to Cabletron Systems' business model. The company provided extensive resources, including training and technical support, to ensure that customers could maximize the potential of their networking solutions. This dedication to customer satisfaction contributed significantly to Cabletron’s reputation in the marketplace.

In summary, Cabletron Systems in 2000 emerged as a frontrunner in the networking industry, characterized by its innovative technologies, commitment to interoperability, emphasis on security, and strong customer support. Their products and solutions were designed to empower businesses, helping them achieve greater efficiency, scalability, and reliability in their network operations.