Managing the Hub 2-39
The SmartSwitch 2000 Chassis View
Figure 2-16. The Ethernet ConÞguration Window
From this window you can manually set the operational mode of the port, or Ñ
for 100Base-TX and 1000Base-SX/LX/CX interfaces Ñ set the port to Auto
Negotiate so that the appropriate operational mode can be determined
automatically. The mode you set will determine the portÕs speed, duplex mode,
and ßow control.
The window displays the following information about the selected Ethernet port:
Port Type
Displays the portÕs type: 100Base-TX RJ-45or RJ71 (for built-in Fast Ethernet ports
and the FE-100TX Fast Ethernet port module), 100Base-FX MMF SC Connector
TIP
If you select the ConÞguration option available for a standard Ethernet or FDDI interface
or for a Fast Ethernet port on a Þrst generation device, an entirely different window will
appear; see ConÞguring Standard Ethernet and FDDI Ports, page 2-31, or
ConÞguring Fast Ethernet Ports on First Generation Devices, page 2-33, for
information on conÞguring these ports.