PPPPassword: Thisis the password your WAP provider uses to
identifyyou
GatewayIP: IPaddress of provider’s WAP gateway, for
example,194.192.001.010
4Useeto select each of the parameters in turn and press Bto
enterthe information
5PressBand select the next parameter in the list
6Whenall parameters have been entered, press Cto return to
theprevious menu level
7Usefto select Set in the main option area and press B
Recordyour WAP settings in the table at the rear of this booklet
foreasy reference.
Invalid Parameters
Whenusing the internet, user names and passwords are normally
casesensitive, so ensure that you enter parameters exactly as
suppliedby your WAP provider.
Alwaysenter leading zeroes in IP addresses where appropriate, for
example:192.193.22.1 should be entered as 192.193.022.001.
Activating the BrowserTheBrowser can be activated from Idle mode either by:
pressingand holding the Pkey
or
pressingB41
Thefirst time that the Browser is activated there is no content stored
sothe Home URL content is displayed (as defined by the network
operator).From the second time onwards, the last displayed page is
recalledfrom cache (cache is the area that stores content
downloadedin the past). When recalling content from cache the
phoneremains off-line (not connected to a WAP server).
Note:
If a different SIM is used in the phone, any secure site authentication
will be lost. New authentication will be required for the replacement SIM
39
WAPBrowser