Goodman Mfg Goodman 90%-95% Gas Furnace Units, GCVC9/GMVC95, ACVC9/AMVC95 Thermostats, Filters

PRODUCT DESIGN

Thermostats:

ComfortNet™ CTK01A* Thermostat Kit

Filters:

Filters are required with this furnace and must be provided by the installer. The filters used must comply with UL900 or CAN/ULCS111 standards. Installing this furnace without filters will void the unit warranty

Upflow Filters

Return air filters may be installated at the furnace side and/or bottom return openings. The furnace bottom return opening and side openings will accommodate the following filter sizes depending on cabinet size:

Side Return Opening(s)

Cabinet	Nominal	Approx.
W idth	Filter Size	Flow Area
(in.)	(in.)	(in2)
All	16 x 25 x 1	400

Bottom Return Opening

Cabinet	Nominal	Approx.
W idth	Filter Size	Flow Area
(in.)	(in.)	(in2)
17-1/2	14 x 25 x 1	350
21	16 x 25 x 1	400
24-1/2	20 x 25 x 1	500

Refer to Minimum Filter Area tables to determine filter area requirement. NOTE: Filters can also be installed elsewhere in the duct system such as a central return.

Input__Airflow

				UPFLOW
		COOLING AIRFLOW REQUIREMENT (CFM)
	600	800	1000	1200	1400	1600	1800	2000
04 53__X*	415*	415*	480	576	---	---	---	---
07 04__X*	---	---	636*	636*	672	768	---	---
09 05__X*	---	---	---	826*	826*	826*	864	960
11 55__X*	---	---	---	875*	875*	875*	875*	960

Input Airflow

				COUNTERFLOW
		COOLING AIRFLOW REQUIREMENT (CFM)
	600	800	1000		1200	1400	1600	1800	2000
0704 __X*
	---	---	634*		634*	672	768	---	---
0714 __X*
0905 __X*	---	---	---		819*	819*	819*	864	960
0915 __X*
11 55__X*	---	---	---		860*	860*	860*	864	960

*Minimum filter area dictated by heating airflow requirement.

Disposable Minimum Filter Area (in2)

[Based on a 300 ft/min filter face velocity]

14