Goodman Mfg service manual Product Identification, GMH950453BXA GMH950703BXA GMH950704CXA

Page 3
GMH950453BXA*

PRODUCT IDENTIFICATION

The model and manufacturing number are used for positive identification of component parts used in manufacturing. Please use these numbers when requesting service or parts information.

GMH950453BXA*

GMH950703BXA*

GMH950704CXA*

GMH950904CXA*

GMH950905DXA*

GMH951155DXA*

WARNING

The United States Environmental Protection Agency (“EPA”) has issued various regulations re-

garding the introduction and disposal of refrigerants introduced into this unit. Failure to follow

 

these regulations may harm the environment and can lead to the imposition of substantial fines.

 

These regulations may vary by jurisdiction. Should questions arise, contact your local EPA office.

 

 

WARNING

Do not connect or use any device

that is not design certified by

 

Goodman for use with this unit.

Serious property damage, personal injury, reduced unit performance and/or hazardous conditions may result from the use of such non-approved devices.

GMH950904CXA* WARNING To prevent the risk of property Manual backgrounddamage, personal injury, or death, do not store combustible materials or use gasoline or

other flammable liquids or vapors in the vicinity of this appliance.

3

Image 3
Contents TECHNICAL MANUAL GMH95 40 95% Gas Furnace0453 A X A A PRODUCT IDENTIFICATIONHIGH VOLTAGE PRODUCT IDENTIFICATION GMH950453BXA GMH950703BXA GMH950704CXAGMH950904CXA GMH950905DXA GMH951155DXA Location Considerations PRODUCT DESIGNAccessibility Clearances Minimum General OperationUpflow/Horizontal COMPONENT IDENTIFICATIONGMH95*****XA COMPONENT IDENTIFICATIONCabinet Size T.O.D. PRIMARY LIMIT PRODUCT DESIGNPRODUCT DESIGN AUXILIARY LIMIT SWITCHESEXPANSION Coil Matches1824 PRODUCT DESIGNDisposable Minimum Filter Area in2 ThermostatsFilters PRODUCT DESIGNGMH95 FURNACE SPECIFICATIONSBLOWER PERFORMANCE BLOWER PERFORMANCE SPECIFICATIONSBLOWER PERFORMANCE SPECIFICATIONS0140F00592 REV. A WIRING DIAGRAMSGMH950453,0704,0905*XAB GMH950703,0904,1155*XACINSTALLING THIS FAILURE TO INJURY OR DEATH GMH950453,0704,0905*XACGMH950703,0904,1155*XAD WIRING DIAGRAMS