Williams 0743511 High Altitudes US Only, High Altitudes Canada Only, First Firing the Furnace

Contents Direct-VentWall Furnace General Information and Technical Data Table of ContentsInstallation Instructions to InstallerSafety Information for Users of LP Gas Safety Rules and General WarningsLP Gas Warning Odor That’s your signal to go into immediate actionSome Points to Remember Technical DataInstallation Wall InstallationThe furnace must be located on an outside wall Part Number WFL-STF088Outside Location for Vent Terminal 5.Place the insulating sheet on the support bracket and attach the bracket with insulation to the wall by tightening the five screws with washer. Figure 3 Be sure the bracket is horizontal Installing a New Main Gas Cock Pressure Testing of the Gas Supply SystemGas Supply High Altitudes Canada Only High Altitudes US OnlyFirst Firing the Furnace Checking the Gas Inlet PressureOPERATING INSTRUCTIONS FOR YOUR SAFETY READ BEFORE OPERATINGTO TURN OFF GAS TO APPLIANCE Operating InstructionsLubrication of Moving Parts Checking and Adjusting the Gas Manifold PressureFlame Visual Check ServicingReplacement Parts