Williams 0743512, 0743511 installation instructions Outside Location for Vent Terminal

Contents Direct-VentWall Furnace Installation Table of ContentsGeneral Information and Technical Data Instructions to InstallerLP Gas Warning Odor Safety Rules and General WarningsSafety Information for Users of LP Gas That’s your signal to go into immediate actionTechnical Data Some Points to RememberThe furnace must be located on an outside wall Wall InstallationInstallation Part Number WFL-STF088Outside Location for Vent Terminal 5.Place the insulating sheet on the support bracket and attach the bracket with insulation to the wall by tightening the five screws with washer. Figure 3 Be sure the bracket is horizontal Installing a New Main Gas Cock Pressure Testing of the Gas Supply SystemGas Supply First Firing the Furnace High Altitudes US OnlyHigh Altitudes Canada Only Checking the Gas Inlet PressureTO TURN OFF GAS TO APPLIANCE FOR YOUR SAFETY READ BEFORE OPERATINGOPERATING INSTRUCTIONS Operating InstructionsFlame Visual Check Checking and Adjusting the Gas Manifold PressureLubrication of Moving Parts ServicingReplacement Parts