Bryant manual Guide Specifications, Products, Catalog No. PDS353AAV---03

Page 22

353AAV

GUIDE SPECIFICATIONS

Plus 90x

Single-Stage/Deluxe Gas Furnace 353AAV

GENERAL System Description

Furnish a _________________ (4--way multipoise) fixed

capacity gas--fired condensing furnace for use with natural gas or propane (factory authorized conversion kit required for propane); furnish cold air return plenum; furnish external medial cabinet for use with accessory media filter or standard filter.

Quality Assurance

Unit will be designed, tested and constructed to the current ANSI Z 21.47/CSA 2.3 design standard for gas--fired central furnaces.

Unit will be 3rd party certified by CSA to the current ANSI Z 21.47/CSA 2.3 design standard for gas--fired central furnaces.

Unit will carry the CSA Blue Star→ and Blue Flame→ labels.

Unit efficiency testing will be performed per the current DOE test procedure as listed in the Federal Register.

Unit will be certified for capacity and efficiency and listed in the latest GAMA Consumer’s Directory of Certified Efficiency Ratings.

Unit will carry the current Federal Trade Commission Energy Guide efficiency label.

Delivery, Storage and Handling

Unit will be shipped as single package only and is stored and handled per unit manufacturer’s recommendation.

Warranty (for inclusion by specifying engineer)

U.S. and Canada only. Warranty certificate available upon request.

PRODUCTS

Equipment

Components shall include: slow--opening gas valve to reduce ignition noise, regulate gas flow, with electric switch gas shut--off; flame proving sensor, hot surface igniter, pressure switch assembly verifies inducer operation; flame rollout switch, drain tubing and installed condensate drain trap, blower and inducer assembly, 40va transformer; low--voltage (heating) (heating/ cooling) thermostat.

Blower Wheel and Blower Motor

Galvanized blower wheel shall be centrifugal type, statically and dynamically balanced. Blower motor of ECM type shall be permanently lubricated with sealed bearings, of _____ hp, and

shall be multiple--speed direct drive. Blower motor shall be soft mounted to the blower scroll to reduce vibration transmission.

Filters

Furnace shall have reusable--type filters. Filter shall be ______ in

(x)______in. An accessory high efficiency Media Filter is available as an option. ______________Media Filter.

Casing

Casing shall be of .030 in. (.03 mm) thickness minimum, pre--painted galvanized steel.

Inducer Motor

Inducer motor shall be soft mounted to reduce vibration transmission.

Primary Heat Exchangers

Primary Heat exchangers shall be 3--Pass 20 gauge corrosion resistant aluminized steel of fold--and--crimp sectional design, which operates under negative pressure.

Secondary Heat Exchangers

Secondary Heat exchangers shall be of a flow--through design having a patented interior laminate coating of polypropylene for greater corrosion resistance with fold--and--crimp design, which operates under negative pressure.

Controls

Controls shall include a microprocessor based integrated electronic control board with at least 11 service troubleshooting codes displayed via diagnostic flashing LED light on the control, has ability to store fault codes, when activated a self--test feature checks all major functions of the furnace within one minute, and

areplaceable automotive--type circuit protection fuse. Multiple operational settings available including separate blower speeds. Cooling airflow will be selectable between 350 or 400 CFM per ton of air conditioning. Features will also include temporary reduced airflow in the cooling mode for improved dehumidification when a Thermidistat→ is selected as the thermostat.

Operating Characteristics

Heating Capacity shall be_________Btuh

input;____________Btuh output capacity. Fuel Gas Efficiency

shall be 93% AFUE. Air delivery shall be__________ CFM

minimum at 0.50 in. wc. external static pressure. Dimensions shall be: depth__________in.; width__________in.; height

_________in. (casing only). Height shall be__________in. with

A/C coil and____________in. overall with plenum.

Electrical Requirements

Electrical supply shall be 115 volts, 60 Hz, single--phase (nominal). Minimum wire size shall be_________AWG;

maximum fuse size or HACR--type, designated circuit breaker shall be _______Amps.

Special Features

Refer to section of the product data sheet identifying accessories and descriptions for specific features and available enhancements.

E2010 Bryant Heating & Cooling Systems D 7310 W. Morris St. D Indianapolis, IN 46231

Printed in U.S.A.

Edition Date: 09/10

Catalog No. PDS353AAV---03

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.

Replaces: PDS353AAV---02

22

Page 21 Page 22
Image 22
Page 21 Page 22
Contents Plus 90X Features & Benefits Unique Seer SolutionWAY Multipoise Design Allows More Applications 353AAV A08421 Physical Data Bryant Accessories Concentric Vent Direct Vent Pipe only Unitsize Downflow Subbase Dimensions IN. MM MentCondensate Trap Media Filter CabinetClearance to Combustibles 335122-201 REV. B LIT TOPPerformance Data Efficiency Unit SizeAIR DELIVERY-CFM with Filter Size Supply2001 to FT MIN. mm 610 to3001 to 914 to 4001 to 5000‡ 1219 to6001 to 7000‡ 5001 to 6000‡ 1524 to1829 to 7001 to 8000‡ 2134 to 8001 to 9000‡ 2438 to9001 to 10,000‡ 2743 to040 060 080 100 120 102Typical Wiring Schematic Electrical DataTypical Installations Upflow ApplicationCrawlspace -- Horizontal Application Products Guide SpecificationsCatalog No. PDS353AAV---03

353AAV specifications

The Bryant 353AAV is a high-efficiency, two-stage gas furnace designed to provide consistent heating and energy savings for residential spaces. With its advanced technology and robust features, the 353AAV is an ideal choice for homeowners looking to enhance their comfort while minimizing energy costs.

One of the main features of the Bryant 353AAV is its two-stage heating capability. This technology allows the furnace to operate at a lower, more efficient capacity most of the time, which not only enhances comfort by reducing temperature fluctuations but also decreases energy consumption. During peak demand, the unit can ramp up to a higher output, ensuring quick warmth when necessary.

Equipped with a variable-speed blower motor, the Bryant 353AAV improves airflow and overall system efficiency. This motor adjusts the speed based on the heating needs of the home, providing steady, even distribution of warm air. This feature reduces noise levels typically associated with traditional furnaces and enhances overall comfort by minimizing hot and cold spots.

The 353AAV also boasts an impressive Annual Fuel Utilization Efficiency (AFUE) rating, often exceeding 90%. This high AFUE indicates that a significant portion of fuel is converted into usable heat, making it an environmentally-friendly option that also saves homeowners money on utility bills. Additionally, this model is compatible with smart thermostat technology, allowing for easy and efficient climate control through mobile devices.

Durability and reliability are also key characteristics of the Bryant 353AAV. The furnace is constructed with high-quality materials, including a corrosion-resistant heat exchanger and a sturdy cabinet designed to withstand the test of time. Bryant backs the 353AAV with a 10-year limited warranty on parts, providing peace of mind for homeowners.

Finally, the Bryant 353AAV is designed with quiet operation in mind. Features like the insulated cabinet and noise-reducing blower motor contribute to a quieter home environment, making this model ideal for families and those sensitive to noise.

In summary, the Bryant 353AAV combines energy efficiency, advanced technology, and robust construction to offer homeowners a reliable heating solution. With its two-stage heating, variable-speed blower motor, high AFUE rating, and quiet operation, this gas furnace stands out as a top choice in residential heating systems.
Top Page Image Contents