Installing Optional Rear Outlet

INSTALLATION

Rear outlet kit, 10” (254mm) boot assembly with register, ROK-1 for warm air discharge into an adjoining room.

Attention: Before furnace is attached to the wall, the wall opening for the rear outlet must be cut, in addition to removal of the outer and inner casing knockouts on furnace.

1.The wall opening measurements for the rear outlet are the following.

A.From floor to bottom of wall opening is 14 3/4” (375mm).

B.From bottom of wall opening to top of wall opening is 8 1/2” (216mm) .

C.Wall opening width is 12 1/8” (308mm).

2.Remove outer casing knockout from outer casing back.

3.Remove inner casing knockout from inner casing.

4.Attach furnace to wall (see Attaching Furnace to Wall).

5.Align clearance holes on 8” x 12” (203mm x 305mm) boot with screw holes on outer casing back and mark boot to be ﬂush with wall surface. Remove boot and cut to proper length.

6.Attach 8” x 12” (203mm x 305mm) boot to outer casing back with (6) #10 x 1/2” (13mm) screws provided.

7.Align clearance holes on 6” x 10” (152mm x 254mm) duct with screw holes on inner casing and mark duct to be 2 1/4” (57mm) shorter than 8” x 12” (203mm x 305mm) boot. Remove duct and cut to proper length.

8.Attach 6” x 10” (152mm x 254mm) duct to inner casing with

(6) #10 x 1/2” (13mm) screws provided.

9.Insert rear register into 8” x 12” (203mm x 305mm) boot. Attach rear register to wall with (2) #10 x 1” (25mm) screws provided.

ALL CONNECTIONS MUST BE MECHANICALLY

MADE AND LISTED CLERANCES MAINTAINED

2 PIECE VENT ENCLOSURE

CUT TO THE PROPER LENGTH*PARTS LISTED ARE TO BE PURCHASED LOCALLY

SPACER STRAP*

MOUNTING HOLE

BASE PLATE*

BASE PLATE

GASKET

Figure 1

	VENT CENTER TO COMBUSTIBLES	4”(102mm) OVAL TYPE “B”
	VENT CENTER TO COMBUSTIBLES	CONNECTION
	MINIMUM CLEARANCE 9/16” (40mm)	CONNECTION
	MINIMUM CLEARANCE 9/16” (40mm)
		7/1/2” (191mm) MINIMUM
		CLEARANCE TOP TO
		COMBUSTIBLES
	VENT ENCLOSURE
	DV-651 or DV-665 or
	DV-666

	SIDE OUTLET
	KIT PART SOK-1
MINIMUM CLEARANCE
TO COMBUSTIBLES
18”(457mm)
Register
Part SOR-1
6 5/8 (168mm)
WALL TO VALVE INLET	4”(102mm) MINIMUM
	4”(102mm) MINIMUM
3”(76mm) TO CENTER OF	CLEARANCE TO
½”(13mm) INLET ELBOW	COMBUSTIBLES
REAR OUTLET	CONTROL VALVE INLET
	3 3/4”(95mm) FLOOR TO
REGISTER KIT #ROK-1
Figure 2
(102mm)	(102mm)

(102mm)

(140mm)

(406mm)

	3 1/4” (83mm)
	11 ½”(292mm)
Figure 3	Figure 3A

Page 6

12429-10-0408

FAW-55IP specifications

The Empire Products FAW-55IP represents a significant advancement in the realm of portable air conditioning systems. This model blends efficiency, portability, and modern technology to provide an unparalleled cooling experience. Designed for both residential and commercial use, the FAW-55IP is ideal for spaces that require reliable climate control without the need for permanent installation.

One of the standout features of the FAW-55IP is its impressive cooling capacity. With a powerful 55,000 BTU rating, it can effectively cool large areas, making it perfect for workshops, retail spaces, and larger rooms in homes. The unit is equipped with a high-efficiency compressor that not only cools effectively but also provides energy savings, making it an eco-friendly choice.

The FAW-55IP utilizes advanced inverter technology, allowing for variable speed operation. This means that the unit can adjust its cooling output based on the ambient temperature, ensuring a more consistent temperature control while minimizing energy consumption. This feature significantly reduces electricity costs compared to traditional air conditioning units.

Portability is another key aspect of the FAW-55IP. With built-in caster wheels and a lightweight design, this air conditioning unit can be easily moved from one room to another, allowing for versatility in its use. Whether you need to cool down a living space during hot summer months or provide comfort in a temporary workspace, this model meets a variety of cooling needs.

The user-friendly digital control panel makes operation simple, with options for adjusting the temperature, fan speed, and mode settings. Additionally, the unit comes with a remote control, allowing users to make adjustments from a distance. Its programmable timer function adds to the convenience, enabling users to set the unit to operate on a schedule that suits their lifestyle.

Furthermore, the FAW-55IP includes advanced filtration technology that helps enhance indoor air quality. The washable filter captures dust, allergens, and other particles, ensuring that the cooled air is clean and fresh. This is particularly beneficial for those with allergies or respiratory conditions, as it helps to create a healthier indoor environment.

In summary, the Empire Products FAW-55IP stands out due to its robust cooling capacity, efficient inverter technology, portability, user-friendly controls, and advanced filtration system. As such, it represents an excellent investment for anyone looking to improve their indoor climate comfort while keeping energy consumption in check.