Motorola 6866550D05-O, Commercial Series Radio CP160 manual Receiving a Call, Sending a Call

Page 22

GETTING STARTED

RECEIVING A CALL

1Turn your radio on.

2Adjust the radio’s volume.

3Select the desired channel.

4Listen for voice activity. The LED indicator flashes red while your radio is receiving.

5To respond, hold the radio vertically 2.5 to 5 cm (1 to 2 inches) from your mouth. Press the PTT to talk; release it to listen

Note: The system may have a limited call time and the call may be terminated automatically if this call time is exceeded.

SENDING A CALL

1Turn your radio on.

2Select the desired channel.

3Monitor for traffic (using the pre-programmed Monitor button) before transmitting to ensure that you do not ‘talk over’ someone who is already transmitting.

3Hold the radio vertically 2.5 to 5 cm

(1 to 2 inches) from your mouth. Press the PTT to talk; release it to listen.

Note: Your radio may be configured for ‘Transmit Inhibit’ under certain conditions (e.g. when the channel is in use by others) in which case, the channel busy tone will sound when you press the PTT or call button to indicate that transmission is inhibited.

English 20

Image 22

Contents Commercial Series Page Contents Phone User SettingsScan Tone PreferencesRadio Overview Radio ControlsRadio Overview Programmable ButtonsFeature Indicator Short Press Long Press Hold Down Button VOX Radio Overview Indicator Tones LED Indicator Battery Charge StatusState Indication LCD Display and Icons Exit the Menu Menu ButtonsMenu Button Menu Scroll ButtonsRadio Overview Menu Navigation Chart Charging Your Battery Battery InformationGetting Started Desktop Rapid Charger LED color StatusRemoving the Battery Accessory InformationAttaching the Battery Attaching the Antenna Removing the Antenna Attaching the Belt Clip Removing the Belt Clip Turn the On/Off/Volume Adjusting the VolumeTurning the Radio on or OFF Home Revert Memory Channel 1 Using Home Revert Memory Channels 1&2Selecting a Radio Channel Store Memory Channel 1Receiving a Call Sending a CallMonitoring Connecting a VOX HeadsetVOX Operation VOX Headset ENABLE/DISABLE Headset SidetoneKeypad LOCK/UNLOCK Non-VOX Headset with In-Line PTTReceiving a Selective Call Radio CallsSending a Selective Call Receiving a Call Alert Sending a Call AlertRepeater or Talkaround Mode To Select either Repeater Mode or Talkaround ModeRadio Calls Scan Start System ScanStop Auto Scan Stop System ScanStart Auto Scan TalkbackDelete a Nuisance Channel Restore Channels to the Scan ListEdit a Scan List ADD or Delete Channels Or untilSet Priority Channels Prioritize a Channel in a Scan ListScanning Sequence Priority ChannelSelected Phone Access the RepeaterReceive a Phone Call Disconnect a Phone Call Immediate Auto or Delayed Auto programmed, exit Phone ModeMake a Phone Call Tone Preferences Tone Settings Feature What it Does SettingsTones ON/OFF Keypad ON/OFF TonesCall Tone Tagging EscalertUser Settings Utilities Features SET Power Level SET Squelch LevelOption Board ON/OFF SET the LightsDisplay the Software Version User Settings