Motorola Commercial Series Radio CP160 manual Access the Repeater, Receive a Phone Call

PHONE

Your radio allows you to place and receive telephone calls through a repeater (depending on phone line availability).

•D appears on the display when you are in Phone mode.

ACCESS THE REPEATER

Your dealer/programmer can preprogram your radio in one of two ways to enter your access/de-access code to the repeater.

Immediate Auto – your radio will transmit the access/deaccess code automatically upon entering phone mode or disconnecting a phone call. You will hear a series of tones, and see your access/ deaccess code on the display, indicating that an access/deaccess code is being sent automatically.

Delayed Auto – your radio will transmit the access code upon a PTT button press. The de-access code is sent automatically when you exit phone mode.

RECEIVE A PHONE CALL

When a phone call is received, a ringing tone sounds, alerting you to answer the phone call. Press the preprogrammed Phone button and skip to step 6.

– or –

1Select a channel that has been programmed for telephone.

2Jto enter menu mode.

3 Lor Muntil	PHONE
4 Jto select	PHONE

Note: The D appears on the display.

5Press and hold the PTT button to talk. Hold the radio in a vertical position with the micro- phone 1 to 2 inches (2.5 to 5 cm) away from your mouth. Release the PTT button when the other party wants to talk, both parties will need to speak in turn.

6Disconnect the phone call when the conversation is completed.

PHONE

33English